Collection

DALI-2 relay actuator for DIN rail mounting. Suitable for inrush currents up to 490 A and nominal current up to 10 A. Potential-free relay, compatible with DALI/DALI-2.

Compact module converting 0-10V control signals to DALI dim levels. Integrated DALI power supply for up to 10 devices. DIN rail mounting.

DALI PS2 30mA: Power supply for DALI bus systems with 30mA. Suitable for installation in flush-mounted boxes. Supports up to 15 DALI devices.

RGB LED strip 24 V, 18 W/m, 550 lm ±10 %, IP20. Lifetime >50,000 h, 102 chips/m, 5 m reel, 3M adhesive for easy mounting. Flexible and ideal for ambient lighting.

PWM-60-12DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 12Vdc at 2.5A; Dimming with DALI 2.

ACL flex connector Wire-PCB for LLE FLEX modules. Internal wiring (AWG18), cable length 100/500/2000 mm, easy and reusable, max. 5 A, 24–48 V, IEC 60695-2-11.

• wDALI-2 Receiver: DALI-2 receiver for wDALI-2 remote. Bridges wireless control to the DALI line; flush-mount, multi-master, loop-through DA terminals.
• wDALI-2 Receiver PS: As above, with integrated 20 mA DALI bus supply (≈10 gear units).

DALI-2 sensor controller for up to 7 sensors (instances 203/204). Four modes: motion, motion+constant light, constant light, light control. Potential-free input, compact, via DALI Cockpit.

Dimmbarer Konstantstrom-LED-Treiber, 1–100 % Dimmbereich, max. 12,5 W, NFC-Programmierung, lange Lebensdauer, für DALI-2 und Notbeleuchtung geeignet. Energiesparend, einfache Installation.

DALI-2 sensor with PIR 15m and light measurement. For instance mode with central DALI-2 control. Mounting: flush, surface or ceiling. Powered via DALI bus. Ideal for high spaces.

The 4-20mA to DALI converter transforms 4-20mA signals into DALI dimming values. This modular device is suitable for DIN-rail mounting and provides integrated DALI power for up to 10 loads.

LED Driver DALI 500-1750mA 75W. Programmable, constant current, dimmable (0-100%) via DALI-2 & Push DIM. Protection against overload, overvoltage, and short circuit.

Compact constant current LED driver (650-1050 mA), NFC, Casambi Ready, dimmable 1-100%, max. 38W, efficiency up to 87%, IP20, lifetime up to 100,000h, 5-year warranty.

Compact LED driver for Constant Current (650-1050 mA) with NFC and DALI. Dimming 1-100%, max. 38 W, efficiency up to 88%, standby < 0.4 W, lifetime up to 100,000 h. Suitable for class I & II luminaires, with thermal protection and programmable output curr

DALI Jalousie module for ceiling installation. Suitable for controlling 230V blinds motors via DALI. 4 programmable operations for opening/closing and adjusting slat tilt. No extra power supply needed, only via DALI.

DALI-2 RM16 HS WE provides switching contacts via the DALI bus, switches 2kW loads, and includes zero-crossing switching for longer lifespan. Configurable with DALI Cockpit software.

Interface for DALI to 0-10V PWM, switches ballast power on/off. DALI device type 5, linear/logarithmic dimming curve, IP20, max 160A inrush, galvanic isolation.

Compact module for automatic brightness reduction with integrated DALI power supply, suitable for installation in flush-mounted boxes. Supports 7 DALI loads, expandable to 64. Two operating modes for power reduction.

Emergency LED driver with DALI-2 interface, automatic test, for LED modules 10–54 V, LiFePO4 battery, constant power output, 3 hours duration.

DALI bus standard IEC62386-parts 101, 102, 207.
Output Voltage 10-24Vdc
Output Current Range350-700mA
Output Power Range 3,5W~12W

LED Driver DALI 150W 12V, constant voltage, 1 channel, PWM-CV signal, DALI-2 certified, 0-100% dimmable, IP20, CE & ENEC certified. Protection against overload & short circuit.

Amplifies DALI signal (relay mode) and extends DALI setups (extended mode). Serves as DALI power supply, switchable via DIP switches.

LED DALI DIM touch controller for switching and dimming. Supports group and broadcast modes. Powered via DALI bus. Touch with vibration feedback.

24V DC Voeding met een maximale uitgangsstroom van 60mA, geschikt voor installatie in een inbouwdoos. Bedrijfstemperatuur van -20°C tot +55°C, beschermingsklasse IP20.