Collection

Compact DALI-2 PD phase dimmers, 3-25W for leading/trailing edge. Suitable for 230V luminaires with DALI system control. Advanced features from firmware 3.5.

The DALI Room Controller serves as an interface between Bluetooth 5.0 and DALI.

The Lunatone smartphone application DALI-Cockpit Mobile offers a clear and simple interface with an installation assistant, various configuration options and a configurable

Phase dimmer with DALI input to control dimmable 230V luminaires in a DALI system. Available for leading edge, trailing edge or as universal device with automatic load detection. Available as compact 25W version or as 300W version. From Firmware 3.5 onwar

DALI LED-driver (CV) with 4 channels to control RGB or RGBW luminaires via one DALI address (DT8). As alternative to the DT8 control the device also supports the operating modes Colour&Dim and SwitchDim2 (control via 2 switch inputs without DALI). Availab

DALI-2 IoT Gateway is an interface to connect the DALI system with smart devices over the Internet of Things (IoT). With the DALI IoT Gateway, a simple realization of an intelligent system is possible, in which devices can be controlled and monitored with

The DALI USB is used as interface between the DALI Cockpit PC Software and the devices on the DALI bus. It enables the addressing and configuration of DALI installations. The DALI USB is available in 6 different versions: with strain relief, for DIN Rail

DALI Daylight Interface with iOS and Android application is a convenient configuration tool for DALI devices.
Once the basic settings have been defined in DALI Cockpit, the device parameters such as daylight curve, timer, schedules, brightness, color tem

The capacitive 7” colour display with 24-bit colour depth allows both the configuration, as well as the control and operation of a DALI system. Numerous widgets enable customisation. Supported functions are dimming and switching of groups, recall of scene

This compact module converts 0-10V input voltages into DALI light levels. Configurations can be made using the DALI Cockpit software. Target address and dimming characteristic can be configured.

The DALI-2 RM8 provide a relay contact that can be controlled via the DALI bus to switch continuous loads up to 2kW.

Interface from KNX to DALI, broadcast output to 4 DALI lines, 4 operating devices per DALI line, integrated DALI bus supply, supported applications: color temperature control (DT8: CW-WW), color control (DT8: RGB, RGBW), other (DT0, DT2 , DT3, DT4, DT6),

The DALI-2 USB facilitates communication between DALI Cockpit PC software and devices on the DALI bus. It supports addressing and configuration of DALI installations and various protocols. Compact with 30mA bus power supply.