DALI-2 MC NFC

Pushbutton coupler with 4 inputs to connect standard potential-free switches or pushbuttons. New functions, DALI-2 and NFC configuration!

€77,80 Excl. tax
€94,14 Incl. tax
Available
0-10V DALI Converter

This compact module converts 0-10V input voltages into DALI light levels. Configurations can be made using the DALI Cockpit software. Target address and dimming characteristic can be configured.

€84,87 Excl. tax
€102,69 Incl. tax
Available
DALI MC4L

Interface with 4, from the DALI bus galvanically isolated, inputs for mains voltage. The inputs can be individually configured with target address, button behaviour and DALI commands. Beside the standard functions, dimming, switching, scene recall, etc.,

€87,70 Excl. tax
€106,12 Incl. tax
Available
DALI MC4L - DIN Rail

Interface with 4, from the DALI bus galvanically isolated, inputs for mains voltage. The inputs can be individually configured with target address, button behaviour and DALI commands. Beside the standard functions, dimming, switching, scene recall, etc.,

€84,87 Excl. tax
€102,69 Incl. tax
Available
DALI LR PS20

Compact control module for automatic power reduction / brightness reduction for night-time. The device has an integrated bus supply (20mA) for up to 7 standard DALI loads, extension possible to max. 64 loads is possible with a DALI Expander.

2 operatin

€90,53 Excl. tax
€109,54 Incl. tax
Available
DALI SI-1L

Sensor Interface to connect conventional motion sensors or pushbuttons to a DALI system. Configuration options are for example: range, target address, DALI commands for on/off, hold time, … . Multiple sensors within one group synchronise automatically. Tw

€49,51 Excl. tax
€59,91 Incl. tax
Available
DALI SI

Sensor Interface to connect conventional motion sensors or pushbuttons to a DALI system. Configuration options are for example: range, target address, DALI commands for on/off, hold time, … . Multiple sensors within one group synchronise automatically. Tw

€42,44 Excl. tax
€51,35 Incl. tax
Available
0-10V DALI 10mA (OFF/1-100%)

This compact module converts analogue 0-10V control signals into DALI light levels. The module has an integrated bus supply for a small DALI system with up to 4 standard DALI ballasts (10mA). The device offers both a current sink and current source 0-10V

€57,99 Excl. tax
€70,17 Incl. tax
Available
DALI GC(-A)

DALI GC / GC-A is a control unit to address 2 DALI groups. With this compact module conventional light switches or pushbuttons can be used to send dimming and switching commands to 2 DALI groups. Using the dial on the back of the device the DALI/ luminari

€52,34 Excl. tax
€63,33 Incl. tax
Available
DALI MC+ /0-10V

Push button coupler with 4 inputs for connection with standard potential free switches or pushbuttons (max wire length 0.50m). Alternatively 0-10V signals or potentiometers can be connected. Each input can be individually configured with target address, b

€56,58 Excl. tax
€68,46 Incl. tax
Available
DALI RTC Timer - Din Rail

The DALI RTC Timer module functions as a timer for DALI commands with quartz precision. Weekday based schedules can be specified. The device supports up to 28 entries, each consisting of a specific time, weekday and DALI command. Housing variants for DIN

€162,67 Excl. tax
€196,83 Incl. tax
Available
DALI-2 MC4L POTI

Push Button Coupler, input 4 x 230V (10m), flexible configurable, sequencer, macros, DT8, DALI-2 Application Controller and Instances, DIN Rail, factory default setting: Application Controller activated (changeable DALI Cockpit), 4 Potentiometers to set t

€132,19 Excl. tax
€159,95 Incl. tax
Available
DALI MC1L

Interface with a, from the DALI bus galvanically isolated, input for mains voltage. The input can be configured with target address, button behaviour and DALI commands. Beside the standard functions, dimming, switching, scene recall, etc., predefined macr

€89,11 Excl. tax
€107,82 Incl. tax
Available
DALI Sequencer

DALI Sequencer is a control unit to recall automatically timed instruction sequences. 4 different customised sequences can be programmed. Only one sequence can be active at a time, and is started and stopped by standard DALI commands. Housing variants fo

€195,20 Excl. tax
€236,19 Incl. tax
Available
0-10V DALI 30mA Din Rail

This compact module converts analogue 0-10V control signals into DALI light levels. The module has an integrated bus supply for a small DALI system with up to 10 standard DALI ballasts (30mA). The device offers both a current sink and current source 0-10V

€57,99 Excl. tax
€70,17 Incl. tax
Available
DALI SC

DALI SC / SC-A is a control unit to recall DALI scenes. The dial on the back of the device can be used to define which of the 16 scenes will be called at button push. A different light scene can be assigned to each of the 4 independent switch inputs. The

€56,58 Excl. tax
€68,46 Incl. tax
Available
DALI GC

DALI GC / GC-A is a control unit to address 2 DALI groups. With this compact module conventional light switches or pushbuttons can be used to send dimming and switching commands to 2 DALI groups. Using the dial on the back of the device the DALI/ luminari

€56,58 Excl. tax
€68,46 Incl. tax
Available
DALI CDC - DIN Rail

The DALI CDC enables a day time based adjustment of colour temperature and light level for Tunable White capable DALI DT8 luminaires (circadian daylight curve). The curve can be adjusted to fit the respective application.

€186,71 Excl. tax
€225,92 Incl. tax
Available
DALI Sequencer - Din Rail

DALI Sequencer is a control unit to recall automatically timed instruction sequences. 4 different customised sequences can be programmed. Only one sequence can be active at a time, and is started and stopped by standard DALI commands. Housing variants fo

€209,35 Excl. tax
€253,31 Incl. tax
Available
0-10V DALI 10mA (OFF/10-100%)

This compact module converts analogue 0-10V control signals into DALI light levels. The module has an integrated bus supply for a small DALI system with up to 4 standard DALI ballasts (10mA). The device offers both a current sink and current source 0-10V

€57,99 Excl. tax
€70,17 Incl. tax
Available
DALI SC-A

DALI SC / SC-A is a control unit to recall DALI scenes. The dial on the back of the device can be used to define which of the 16 scenes will be called at button push. A different light scene can be assigned to each of the 4 independent switch inputs. The

€52,34 Excl. tax
€63,33 Incl. tax
Available
DALI RTC Timer

The DALI RTC Timer module functions as a timer for DALI commands with quartz precision. Weekday based schedules can be specified. The device supports up to 28 entries, each consisting of a specific time, weekday and DALI command. Housing variants for DIN

€162,67 Excl. tax
€196,83 Incl. tax
Available
0-10V DALI 10mA (MIN/10-100%)

This compact module converts analogue 0-10V control signals into DALI light levels. The module has an integrated bus supply for a small DALI system with up to 4 standard DALI ballasts (10mA). The device offers both a current sink and current source 0-10V

€57,99 Excl. tax
€70,17 Incl. tax
Available
0-10V DALI 10mA (MIN/1-100%)

This compact module converts analogue 0-10V control signals into DALI light levels. The module has an integrated bus supply for a small DALI system with up to 4 standard DALI ballasts (10mA). The device offers both a current sink and current source 0-10V

€57,99 Excl. tax
€70,17 Incl. tax
Available
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »