Collection

DALI-2 relay actuator for DIN rail mounting. Suitable for inrush currents up to 490 A and nominal current up to 10 A. Potential-free relay, compatible with DALI/DALI-2.

The PWM-90-12DA2 is a 90W 12V constant voltage (CV) LED driver with PWM output and DALI 2.0 dimming. Ideal for LED strips, waterproof (IP67), high efficiency, and low no-load power consumption.

The LCM-60DA2 LED driver provides 60W of constant current (CC) with DALI 2.0 and push dimming. Offers modular outputs from 0.5A to 1.4A and an extra 12Vdc at 50mA.

DALI LED Power Supply: Provides 25W power at 24V/36V constant voltage. Suitable for 230V AC with safe separation from mains and DALI. Independent brightness and color temperature control.

DALI 4Net B: Control of 256 DALI devices across 4 lines. Configuration via Ethernet and DALI-Cockpit software. Supports Modbus TCP, offers advanced features like circadian cycle and emergency lighting.

DALI-2 Expander DES expands the DALI line, supports Switch&Dim, provides 25mA/200mA bus power, extends cable length to 300m, and is suitable for installation in luminaires or ceiling mounting.

DALI-2 switching actuator with zero-cross switching. For loads up to 2000VA / 8A (12A breaking, 60A inrush). 1 changeover contact, flush mounting, configurable via DALI Cockpit.

Dimmable constant current LED driver (200–600 mA), 1–100% dimming, max. 25 W, NFC programmable, DALI-2, for emergency lighting. Compact, energy efficient, easy installation.

Passive infrared presence sensor for ceiling mounting, DALI-2 certified. 360° detection up to Ø25m (491m²). Measures presence and light, configurable via DALI bus or remote control.

The DALI-2 Display 7" Emergency is a universal control panel for DALI emergency lighting systems, offering status monitoring, test results, and automatic functionality checks.

AC-DC LED driver with Constant Voltage (CV); 12V, 10A output, 120W; PWM for LED strips; dimming with DALI 2.0; IP67 housing.

DALI 2-channel LED dimmer for constant current, suitable for LED modules. Available in 350mA, 500mA, 700mA, and 1000mA. Versions with common plus and minus pole available.

wDALI Transceiver is a wireless DALI control device connected to the DALI bus. Powered by DALI bus, frequency band 2.4 GHz, reception range up to 300m outdoors.

The wDALI Switch Cross is a wireless DALI control module that can be mounted anywhere without installation effort. Each button can be assigned specific DALI commands and functions.

Warm white LED strip 2850 K, 1700 lm ±10 %, 24 V, 18 W/m, IP20. CRI >90, 102 chips/m, 2835 SMD, lifetime >50,000 h, 3M adhesive. 5 m reel for indoor ambient lighting.

4-fold DALI-2 pushbutton interface for potential-free switches, configurable as make or break contact, plus 2 extra inputs for sensors or potentiometers. Powered by DALI bus. Easy installation.

Compact 1-channel DALI-2 switching actuator for direct switching of lamps, fans and pumps via the DALI bus. Suitable for high inrush currents and easy installation.

LED Driver DALI 150W 12V, constant voltage, 1 channel, PWM-CV signal, DALI-2 certified, 0-100% dimmable, IP20, CE & ENEC certified. Protection against overload & short circuit.

Compact DALI-2 sensor module with PIR motion detection, light intensity measurement, and constant light control. Includes application controller, suitable for indoor and outdoor use (IP65), ideal for wall mounting in corridors.

DALI LED-driver for the constant current LED modules (CC) with 1 channel. Output signal can be controlled via DALI or SwitchDim2. Available with input voltage of 12V to 48V DC, different output currents ranging from 350mA to 2500mA, and PWM output.

Compact module for automatic brightness reduction with integrated DALI power supply, suitable for installation in flush-mounted boxes. Supports 7 DALI loads, expandable to 64. Two operating modes for power reduction.

The 89454248 DALI Flash USB DIN rail interface connects PC software to DALI devices for addressing and configuration. Supports DALI, DALI-2, and provides flash storage for project files. Suitable for DIN rail mounting.

Compact 1TE DIN rail module for controlling 4 DALI lines (up to 256 devices). Configuration via Ethernet with DALI-Cockpit software. Supports Modbus TCP. Includes RTC, scheduler, and central functions.

Cover with knob for dimmer and electronic potentiometer. Suitable for Gira System 55. Available in various colors and finishes. Easy installation.