Collection

DALI2 parts 101,102,207
Dimmable 12 V LED driver for constant voltage PWM-CV 36 W
Power 230VAC output 12

DALI bus standard IEC62386-parts 101, 102, 207.
DALI-2DT6
Output Voltage 9-42Vdc
Output Current Range 200-800mA
Output Power Range 1,8W~30W

Forms automatically a wireless communication network with up to 250 nodes
Adjustable output current between 100 – 400 mA via NFC
Max. output power 14 W
basicDIM Wireless

lumDATA (DALI-2 part ext. 251, 252 and 253)
Can be either used build-in or independent with clip-on strain-relief (see accessory)
Dimming range 1 to 100 % (min. 5 mA)
Adjustable output current between 300 – 700 mA via NFC or DALI

Push Button Coupler, input 4 x 230V (10m), flexible configurable, sequencer, macros, DT8, DALI-2 Application Controller and Instances, DIN Rail, factory default setting: Application Controller activated (changeable DALI Cockpit), 4 Potentiometers to set t

integration of up to 4 EnOcean buttons, configurable, sequencer, macros, DT8, DALI-2 application controller and instances, delivery status: application controller active, instances deactivated

LCM-25DA2
ELGC-300-M-ADAAC-DC Single output LED driver Constant Power Mode with built-in PFC; Output 116Vdc at 2.8A; IP67; Dimming with DALI

Device with 2 DALI Tunable White LED dimmers. Suitable for constant voltage (CV) LED modules of 12V to 48V.

2 DALI addresses (Device Type 8, Color Type Tc), each DT8-Tc address allows independent control of brightness and color temperature.
Available

DALI LED-driver (CC) with 4 independent channels. Each channel has its own DALI address. As alternative to the DT6 control the device also supports the operating modes Colour&Dim (suitable for RGB and RGBW luminaires) and SwitchDim2 (control via 2 switch

DALI RM8/RM16 provides a via DALI bus controllable relay switch, which allows direct switching of permanent loads up to 2kW. Various compact designs and variations with make contact or changeover contact are available. The purposeful switching in voltage

This interface converts DALI signals to a 1-10V control signal, thus enables the integration of operating devices with 1-10V control input into a DALI system. With the help of the switching relay the power supply of operating devices can be switched on an

This interface converts DALI signals to a 1-10V control signal, thus enables the integration of operating devices with 1-10V control input into a DALI system. With the help of the switching relay the power supply of operating devices can be switched on an

This compact module converts analogue 0-10V control signals into DALI light levels. The module has an integrated bus supply for a small DALI system with up to 4 standard DALI ballasts (10mA). The device offers both a current sink and current source 0-10V

DALI GC / GC-A is a control unit to address 2 DALI groups. With this compact module conventional light switches or pushbuttons can be used to send dimming and switching commands to 2 DALI groups. Using the dial on the back of the device the DALI/ luminari

Compact control module for automatic power reduction / brightness reduction for night-time. The device has an integrated bus supply (20mA) for up to 7 standard DALI loads, extension possible to max. 64 loads is possible with a DALI Expander.

2 operatin

The DALI CDC enables a day time based adjustment of colour temperature and light level for Tunable White capable DALI DT8 luminaires (circadian daylight curve). The curve can be adjusted to fit the respective application.

DALI bus standard IEC62386-101, 102, 209
DALI-2 DT6 and DT8
Output Voltage 9-42Vdc
Output Current Range 100-500mA
Output Power Range 0,9-12W

DALI bus standard IEC62386-parts 101, 102, 207.
Output Voltage 10-54Vdc
Output Current Range200-1200mA
Output Power Range 2W~36W

Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
24 V, 18 W

Stylish DALI-taster: capacitive touch screen, glass display, multiple control modules, DALI-line power supply and adjustable light groups. RAL 9010 white.

For supplying 240 mA for DALI devices or control modules without their own power supplies

DALI-2 CS Integration THP-AQ
for Integration in systems with central control units
sensor for motion, light, temperature, relative humidity, air pressure and air quality

Compact sensor module with motion detection (PIR) and light intensity measurement for DALI-2 systems. The module gathers measurements for the building management system (instance mode) – (DALI-2 CS Master, WAGO, Beckhoff, etc.).

PWM-90-12DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 12Vdc at 7.5A; Dimming with DALI; IP67