Signal converter

This interface converts DALI signals to a 1-10V control signal, thus enables the integration of operating devices with 1-10V control input into a DALI system. With the help of the switching relay the power supply of operating devices can be switched on an

This interface converts DALI signals to a 1-10V control signal, thus enables the integration of operating devices with 1-10V control input into a DALI system. With the help of the switching relay the power supply of operating devices can be switched on an

PWM-120-24DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 24Vdc at 5A; Dimming with DALI 2.0

This interface converts DALI signals to a galvanically isolated, analogue 0-10V signal, thus enables the integration of operating devices with 1-10V control input into a DALI system. DALI Device Type 5 (IEC62386-206) compatible: linear or logarithmic dimm

DALI interface module to convert DT8-Tc control commands to DT6 control signals. The module enables dimming and the setting of the colour temperature via DT8 commands, also for luminaires with two DALI DT6 LED-driver.

PWM-120-12DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 12Vdc at 10A; Dimming with DALI 2.0

LCM-25DA2
ELGC-300-M-ADAAC-DC Single output LED driver Constant Power Mode with built-in PFC; Output 116Vdc at 2.8A; IP67; Dimming with DALI

This interface converts DALI signals to a galvanically isolated PWM signal, thus enables the integration of operating devices with PWM control input into a DALI system. DALI Device Type 5 (IEC62386-206) compatible: linear or logarithmic dimming curve, swi

PWM-90-48DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 48VDC at 1.25A; Dimming with DALI 2.0

PWM-60-24DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 24Vdc at 2.5A; Dimming with DALI 2.

LCM-40DA2
AC-DC Multi-Stage LED driver Constant Current (CC); Modular output 0.35A/0.5A/0.6A/0.7A/0.9A/1.05A; Dimming with DALI 2.0 & push; extra 12Vdc at 50mA

This interface converts DALI signals into a 1-10V control signal and allows the integration of operating devices with two 1-10V control inputs for brightness and color temperature into a DALI system. Output mode for channel1 / channel2 can be defined as e

PWM-90-12DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 12Vdc at 7.5A; Dimming with DALI; IP67

PWM-90-24DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 24Vdc at 3.75A; Dimming with DALI 2.0

This interface converts DALI signals into a 1-10V control signal and allows the integration of operating devices with two 1-10V control inputs for brightness and color temperature into a DALI system. Output mode for channel1 / channel2 can be defined as e

This interface converts DALI signals to a galvanically isolated PWM signal, thus enables the integration of operating devices with PWM control input into a DALI system. DALI Device Type 5 (IEC62386-206) compatible: linear or logarithmic dimming curve, 0-1

This interface converts DALI signals to an analogue 0-10V signal, thus enables the integration of operating devices with an electrically isolated 1-10V control input into a DALI system. DALI Device Type 5 (IEC62386-206) compatible: linear or logarithmic d

LCM-60DA2
AC-DC Multi-Stage LED driver Constant Current (CC); Modular output 0.5A/0.6A/0.7A/0.9A/1.05A/1.4A; Dimming with DALI 2.0 & push; extra 12Vdc at 50mA

LED driver (CV) with one channel, can be operated as PWMBooster or Dimmer. The device operates as PWM-Booster, if PWM-signals are applied to the input (50Hz-1kHz). If operated with 100kΩ potentiometer or 0-10V control devices (active and passive), the dev

This interface converts DALI signals to a 1-10V control signal, thus enables the integration of operating devices with 1-10V control input into a DALI system. With the help of the switching relay the power supply of operating devices can be switched on an

This interface converts DALI signals to a 1-10V control signal, thus enables the integration of operating devices with 1-10V control input into a DALI system. With the help of the switching relay the power supply of operating devices can be switched on an

With only one DT6 DALI address, the Dim2Warm module allows the simultaneous control of brightness while changing the colour temperature. The lower the dimming value, the warmer the light.