LED/RGB dimmers (DT6 and DT8)

DALI LED-driver (CV) with 4 channels to control RGB or RGBW luminaires via one DALI address (DT8). As alternative to the DT8 control the device also supports the operating modes Colour&Dim and SwitchDim2 (control via 2 switch inputs without DALI). Availab

DALI LED-driver. Input voltage 230VAC, output with secure isolation between mains and DALI. Output signal can be controlled via DALI or SwitchDim2.
Versions for constant current (250mA/350mA … 1050mA) and constant voltage (24V, 1A max.) are available.

DALI LED-driver (CV) with 3 channels to control RGB luminaires via one DALI address (DT8). As alternative to the DT8 control the device also supports the operating modes Colour&Dim and SwitchDim2 (control via 2 switch inputs without DALI). Available with

DALI LED-driver for constant voltage LED modules (CV) with 1 channel. Output signal can be controlled via DALI or Sw&Dim/ SwitchDim2. Available in three different housing versions, with input voltage of 12V to 28V DC or 12V to 48V DC, version dependent in

DALI LED-driver (CC) with 4 channels to control RGB or RGBW luminaires via one DALI address (DT8). As alternative to the DT8 control the device also supports the operating modes Colour&Dim and SwitchDim2 (control via 2 switch inputs without DALI). Availab

DALI LED-driver (CV) with 2 channels to control Tunable White luminaires via one DALI address (DT8). As alternative to the DT8 control the device also supports the operating modes Balance&Dim, Dim2Warm and SwitchDim2 (control via 2 switch inputs without D

DALI LED-driver (CV) with 2 independent channels. Each channel has its own DALI address. As alternative to the DT6 control the device also supports the operating modes Balance&Dim, Dim2Warm (suitable for Tunable White luminaires) and SwitchDim2 (control v

DALI bus standard IEC62386-parts 101, 102, 207.
Output Voltage 10-54Vdc
Output Current Range 150-900mA
Output Power 25W

DALI2 parts 101,102,207,209
Dimmable 24 V LED driver for constant voltage PWM-CV 150 W
Power 230VAC output 24V

DALI LED-driver (CV) with 3 independent channels. Each channel has its own DALI address. As alternative to the DT6 control the device also supports the operating modes Colour&Dim (suitable for RGB luminaires) and SwitchDim2 (control via 2 switch inputs wi

DALI bus standard IEC62386-parts 101, 102, 207.
DALI-2DT6
Output Voltage 9-42Vdc
Output Current Range300-1050mA
Output Power Range 2,7W~40W

DALI bus standard IEC62386-parts 101, 102, 209.
DALI-2DT6/DT8
Output Voltage 9-42Vdc
Output Current Range 100-700mA
Output Power Range 0.9W~20W

DALI LED-driver for the constant current LED modules (CC) with 1 channel. Output signal can be controlled via DALI or SwitchDim2. Available with input voltage of 12V to 48V DC, different output currents ranging from 350mA to 2800mA, and PWM output.

LCM-25DA2
ELGC-300-M-ADAAC-DC Single output LED driver Constant Power Mode with built-in PFC; Output 116Vdc at 2.8A; IP67; Dimming with DALI

DALI LED-driver (CC) with 4 independent channels. Each channel has its own DALI address. As alternative to the DT6 control the device also supports the operating modes Colour&Dim (suitable for RGB and RGBW luminaires) and SwitchDim2 (control via 2 switch

DALI bus standard IEC62386-parts 101, 102, 207.
DALI-2DT6
Output Voltage 9-42Vdc
Output Current Range 100-700mA
Output Power Range 0.9W~20W

LCM-60DA2
AC-DC Multi-Stage LED driver Constant Current (CC); Modular output 0.5A/0.6A/0.7A/0.9A/1.05A/1.4A; Dimming with DALI 2.0 & push; extra 12Vdc at 50mA

DALI LED-driver (CV) with 4 independent channels. Each channel has its own DALI address. As alternative to the DT6 control the device also supports the operating modes Colour&Dim (suitable for RGB and RGBW luminaires) and SwitchDim2 (control via 2 switch

DALI LED-driver (CC) with 2 independent channels. Each channel has its own DALI address. As alternative to the DT6 control the device also supports the operating modes Balance&Dim, Dim2Warm (suitable for Tunable White luminaires) and SwitchDim2 (control v

DALI bus standard IEC62386-101, 102, 209
DALI-2 DT6 and DT8
Output Voltage 9-42Vdc
Output Current Range 100-500mA
Output Power Range 0,9-12W

Input voltage 12 - 24Vdc
Output voltage 12 - 24Vdc
Output 4x5A
LED Outputs 4x and Ouput signaal 1x
Constant Voltage driver

DALI2 parts 101,102,207
DT8
Dimmable 24 V LED driver for constant voltage PWM-CV 100 W
Power 230VAC output 24V

DALI2 parts 101,102,207
Dimmable 12 V LED driver for constant voltage PWM-CV 36 W
Power 230VAC output 12

DALI bus standard IEC62386-parts 101, 102, 207.
DALI-2DT6
Output Voltage 9-42Vdc
Output Current Range 200-800mA
Output Power Range 1,8W~30W