LED/RGB dimmers (DT6 and DT8)

Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
24 V, 18 W

Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
24 V, 150W

Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
24 V, 100W

lumDATA (DALI-2 part ext. 251, 252 and 253)
Can be either used build-in or independent with clip-on strain-relief (see accessory)
Dimming range 1 to 100 % (min. 5 mA)
Adjustable output current between 650 – 1050 mA via NFC or DALI

lumDATA (DALI-2 part ext. 251, 252 and 253)
Can be either used build-in or independent with clip-on strain-relief (see accessory)
Dimming range 1 to 100 % (min. 5 mA)
Adjustable output current between 300 – 700 mA via NFC or DALI

lumDATA (DALI-2 part ext. 251, 252 and 253)
Can be either used build-in or independent with clip-on strain-relief (see accessory)
Dimming range 1 to 100 % (min. 5 mA)
Adjustable output current between 100 – 400 mA via NFC or DALI

Forms automatically a wireless communication network with up to 250 nodes
Adjustable output current between 100 – 400 mA via NFC
Max. output power 14 W
basicDIM Wireless

Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
24 V, 35 W

Input voltage 12 - 24Vdc
Output voltage 12 - 24Vdc
Output 4x5A
LED Outputs 4x and Ouput signaal 1x
Constant Voltage driver

Input voltage 12 - 24Vdc
Output 12A
Signaal PWM-CV

LCM-60DA2
AC-DC Multi-Stage LED driver Constant Current (CC); Modular output 0.5A/0.6A/0.7A/0.9A/1.05A/1.4A; Dimming with DALI 2.0 & push; extra 12Vdc at 50mA

LCM-25DA2
ELGC-300-M-ADAAC-DC Single output LED driver Constant Power Mode with built-in PFC; Output 116Vdc at 2.8A; IP67; Dimming with DALI

DALI LED-driver (CV) with 4 channels to control RGB or RGBW luminaires via one DALI address (DT8). As alternative to the DT8 control the device also supports the operating modes Colour&Dim and SwitchDim2 (control via 2 switch inputs without DALI). Availab

DALI LED-driver (CC) with 4 channels to control RGB or RGBW luminaires via one DALI address (DT8). As alternative to the DT8 control the device also supports the operating modes Colour&Dim and SwitchDim2 (control via 2 switch inputs without DALI). Availab

DALI LED-driver (CV) with 3 channels to control RGB luminaires via one DALI address (DT8). As alternative to the DT8 control the device also supports the operating modes Colour&Dim and SwitchDim2 (control via 2 switch inputs without DALI). Available with

DALI LED-driver (CC) with 3 channels to control RGB luminaires via one DALI address (DT8). As alternative to the DT8 control the device also supports the operating modes Colour&Dim and SwitchDim2 (control via 2 switch inputs without DALI). Available with

DALI LED-driver for Tunable White LED. Input voltage 230VAC, output with secure isolation between mains and DALI, independent control of light level and colour temperature (DT8). As alternative to the DT8 control the device also supports the operating mod

DALI LED-driver for Tunable White LED. Input voltage 230VAC, output with secure isolation between mains and DALI, independent control of light level and colour temperature (DT8). As alternative to the DT8 control the device also supports the operating mod

DALI LED-driver (CV) with 2 channels to control Tunable White luminaires via one DALI address (DT8). As alternative to the DT8 control the device also supports the operating modes Balance&Dim, Dim2Warm and SwitchDim2 (control via 2 switch inputs without D

DALI LED-driver (CC) with 2 channels to control Tunable White luminaires via one DALI address (DT8). As alternative to the DT8 control the device also supports the operating modes Balance&Dim, Dim2Warm and SwitchDim2 (control via 2 switch inputs without D

DALI LED-driver (CV) with 4 independent channels. Each channel has its own DALI address. As alternative to the DT6 control the device also supports the operating modes Colour&Dim (suitable for RGB and RGBW luminaires) and SwitchDim2 (control via 2 switch

DALI LED-driver (CC) with 4 independent channels. Each channel has its own DALI address. As alternative to the DT6 control the device also supports the operating modes Colour&Dim (suitable for RGB and RGBW luminaires) and SwitchDim2 (control via 2 switch

DALI LED-driver (CV) with 3 independent channels. Each channel has its own DALI address. As alternative to the DT6 control the device also supports the operating modes Colour&Dim (suitable for RGB luminaires) and SwitchDim2 (control via 2 switch inputs wi

DALI LED-driver (CC) with 3 independent channels. Each channel has its own DALI address. As alternative to the DT6 control the device also supports the operating modes Colour&Dim (suitable for RGB luminaires) and SwitchDim2 (control via 2 switch inputs wi