Collection

Device with 2 DALI Tunable White LED dimmers. Suitable for constant voltage (CV) LED modules of 12V to 48V.

2 DALI addresses (Device Type 8, Color Type Tc), each DT8-Tc address allows independent control of brightness and color temperature.
Available

DALI Jalousie module can be used to control blind motors with 230V control input via DALI. Four configurable profiles can be programmed to open/close the blinds and to change the tilt angle. Different versions suitable for DIN rail mounting or remote ceil

Interface with 4, from the DALI bus galvanically isolated, inputs for mains voltage. The inputs can be individually configured with target address, button behaviour and DALI commands. Beside the standard functions, dimming, switching, scene recall, etc.,

DALI PS serves as power supply for the DALI bus system. Voltage and current limitation according to standard as well as timing ensure a reliable bus communication. With the output current of up to 250mA an entire DALI line can be supplied. Up to 64 addres

DALI PS serves as power supply for the DALI bus system. Standardised voltage and current limitation as well as timing ensure a reliable bus communication. With the output current of up to 250mA and entire DALI line can be supplied. Up to 64 addressable DA

Stylish DALI-taster: capacitive touch screen, glass display, multiple control modules, DALI-line power supply, double terminal blocks, adjustable light groups & color temp. control. RAL 9010 white.

DALI LED-driver (CV) with 3 independent channels. Each channel has its own DALI address. As alternative to the DT6 control the device also supports the operating modes Colour&Dim (suitable for RGB luminaires) and SwitchDim2 (control via 2 switch inputs wi

Robust DALI switching actuator for ceiling installation. Controllable via DALI bus, suitable for loads up to 2kW. Operates at -20°C to +60°C, IP20, with Wieland connectors.

wDALI Controls Wireless DALI Controls
overview
Wireless control of a DALI circuit
A wDALI control consists of at least two components: a receiving unit, which is connected to the DALI bus, and a control device (transmitter unit) that can be placed anyw

The DALI USB is used as interface between the DALI Cockpit PC Software and the devices on the DALI bus. It enables the addressing and configuration of DALI installations. The DALI USB is available in 6 different versions: with strain relief, for DIN Rail

This compact 1HP DIN rail module enables the independent control of up to 4 DALI lines, which equals 256 DALI operating devices. Efficient scaling is possible with external DALI bus supplies. Via the DALI4Net connected control devices and control gear c

This compact 1HP DIN rail module enables the independent control of up to 4 DALI lines, which equals 256 DALI operating devices. Efficient scaling is possible with external DALI bus supplies. Via the DALI4Net connected control devices and control gear c

DALI gear for playback of internet radio stations or audio files via the DALI bus

This interface converts DALI signals to a 1-10V control signal, thus enables the integration of operating devices with 1-10V control input into a DALI system. With the help of the switching relay the power supply of operating devices can be switched on an

DALI-2 Relay Unit - DR 3,6 Amp 240Vac

lumDATA (DALI-2 part ext. 251, 252 and 253)
Can be either used build-in or independent with clip-on strain-relief (see accessory)
Dimming range 1 to 100 % (min. 5 mA)
Adjustable output current between 300 – 700 mA via NFC or DALI

DALI LED-driver (CC) with 3 channels to control RGB luminaires via one DALI address (DT8). As alternative to the DT8 control the device also supports the operating modes Colour&Dim and SwitchDim2 (control via 2 switch inputs without DALI). Available with

The compact device is used to expand the DALI line.
The DALI-2 Expander is connected to the DALI line (DALI IN terminals) and behaves like a DALI ballast with a DALI address.

Forms automatically a wireless communication network with up to 250 nodes
Adjustable output current between 100 – 400 mA via NFC
Max. output power 14 W
basicDIM Wireless

DALI-2 ROT Integration
DALI-2 ROT Integration is a rotary and push button for integration into higher-level building management systems (WAGO, Beckhoff, LUNATONE DALI-2 KNX gateway).

DALI Power Supply 80mA, back box

LCM-60DA2
AC-DC Multi-Stage LED driver Constant Current (CC); Modular output 0.5A/0.6A/0.7A/0.9A/1.05A/1.4A; Dimming with DALI 2.0 & push; extra 12Vdc at 50mA

DALI relay controller with 4 channels. Each channel has its own DALI address. Designed for controlling relays and contactors with 12V to 48V DC control input. Different versions suitable for DIN rail mounting or remote ceiling installation (housing with s

With the DALI Temp PT1000 temperature can be measured. The measured temperature can be read using DALI scene values. Alongside the integrated temperature sensor, an external PT1000 sensing element can be added. The device can be used to control blinds or