Collection

DALI Bluetooth Low Energy Interface in combination with the DALI Touch App enables operation and control of DALI Systems with iOS and Android devices. The functionality of the DALI Bluetooth Interface is identical to the DALI Touchpanel Bluetooth and can

DALI Repeater provides a galvanic isolation between two DALI lines without restricting the communication flow. The maximum number of DALI addresses in the bus system remains 64. Each of the galvanically isolated sides must be supplied with up to 250mA out

DALI bus standard IEC62386-parts101, 102, 207.
Output Voltage 10-42Vdc
Output Current Range 100-400mA
Output Power Range 1W-12W

DALI-2 Relay Compatible with DALI and DALI-2 versions 1 channel actuator (switch) with DALI-2 input

Compacte sensormodule met geïntegreerde bewegingsdetectie (PIR), lichtintensiteitsmeting en lichtregeleenheid.
Naast de standaard detectie in het buitengebied heeft de DALI CS Mini een gevoeliger binnendetectiebereik voor het detecteren van kleine bewegi

The LED Touch Controller DALI 1 Zone - EDA1 is a 1 channel switch. This means that it can serve 1 address. DALI 1 device

Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
24 V, 100W

PWM-90-24DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 24Vdc at 3.75A; Dimming with DALI 2.0

DALI LED-driver for the constant current LED modules (CC) with 1 channel. Output signal can be controlled via DALI or SwitchDim2. Available with input voltage of 12V to 48V DC, different output currents ranging from 350mA to 2800mA, and PWM output.

wDALI Controls Wireless DALI Controls
overview
Wireless control of a DALI circuit
A wDALI control consists of at least two components: a receiving unit, which is connected to the DALI bus, and a control device (transmitter unit) that can be placed anyw

The DALI RTC Timer module functions as a timer for DALI commands with quartz precision. Weekday based schedules can be specified. The device supports up to 28 entries, each consisting of a specific time, weekday and DALI command. Housing variants for DIN

The DALI Flash USB enables the communication between the DALI Cockpit PC Software and devices on the DALI bus. A flash memory is available to store the bus configuration and all device settings. Thus they are permanently available, regardless of the PC us

The DALI RM16 provides a relay contact that can be controlled via the DALI bus

DALI2 parts 101,102,207,209
DALI-2DT8
Output Voltage 9-54Vdc
Output Current Range 250-1000mA
Output Power Range 0,9W~20W

lumDATA (DALI-2 part ext. 251, 252 and 253)
Can be either used build-in or independent with clip-on strain-relief (see accessory)
Dimming range 1 to 100 % (min. 5 mA)
Adjustable output current between 100 – 400 mA via NFC or DALI

Module for the wireless connection of spatially separated DALI loads to a DALI system with BT5 Long Range. The transmitter sends DALI commands from the DALI system to one or more receivers. The receiver is available with or without an integrated DALI bus

With the DALI Expander a new DALI sub-line can be created and supplied with power and information. The connected devices within the DALI sub-line can be controlled broadcast via the address of the DALI Expander. Alternatively the DALI sub-line can be cont

DALI PS serves as power supply for the DALI bus system. Standardised voltage and current limitation as well as timing ensure a reliable bus communication. With the output current of up to 250mA and entire DALI line can be supplied. Up to 64 addressable DA

KDA-64 KNX-Dali-gateway

A remote control for DALI systems with 12 buttons. This remote control enables location independent control of a DALI system (light, blends, ventilators, … ). Each button can be individually configured with target address, button behaviour and DALI comman

Module with serial interface to communicate with the DALI bus via RS232, with RJ45 plug and screw terminals. Allows e.g. the connection of a PLC to a DALI system via RS232 for bidirectional data transmission. Suitable for addressing, configuration, status

The DALI USB is used as interface between the DALI Cockpit PC Software and the devices on the DALI bus. It enables the addressing and configuration of DALI installations. The DALI USB is available in 6 different versions: with strain relief, for DIN Rail

DALI bus standard IEC62386-parts 101, 102, 209.
DALI-2DT6/DT8
Output Voltage 9-42Vdc
Output Current Range 100-700mA
Output Power Range 0.9W~20W

DALI-2 ROT Touch
L3: Tunable White und Szenen