Collection
Pushbutton module with four programmable buttons. With the DALI Cockpit Software, as well as an NFC-ready smartphone and the Lunatone NFC app, each button can be individually configured with target address, button behaviour and DALI commands. Besides the
€161,74 Incl. tax
The DALI USB is used as interface between the DALI Cockpit PC Software and the devices on the DALI bus. It enables the addressing and configuration of DALI installations. The DALI USB is available in 6 different versions: with strain relief, for DIN Rail
€314,50 Incl. tax
The DALI-2 USB facilitates communication between DALI Cockpit PC software and devices on the DALI bus. It supports addressing and configuration of DALI installations and various protocols. Compact with 30mA bus power supply.
€350,90 Incl. tax
With the DALI Expander a new DALI sub-line can be created and supplied with power and information. The connected devices within the DALI sub-line can be controlled broadcast via the address of the DALI Expander. Alternatively the DALI sub-line can be cont
€210,26 Incl. tax
86456203-HS DALI2 RM16 Din Rail: DALI2-zertifizierter Schalter für nahtlose Integration und effiziente Steuerung von Nicht-DALI-Lasten.
€104,40 Incl. tax
increase the number of DALI lines for the DALI-2 Display 7”, 3 additional DALI lines, use in combination with a DALI-2 Display 7”
DALI-2 Display Bus Extension
The module is used in combination with a DALI-2 Display 7” Plus or DALI-2 Display 7” Emerg
€672,09 Incl. tax
LCM-25DA2
ELGC-300-M-ADAAC-DC Single output LED driver Constant Power Mode with built-in PFC; Output 116Vdc at 2.8A; IP67; Dimming with DALI
€35,70 Incl. tax
The DALI LS is a compact light sensor with integrated constant lighting control. DALI LS is able to automatically regulate the light level of individual luminaires or lighting groups. Using the dial on the back of the device the preferred light level can
€71,88 Incl. tax
The DALI Touchpanel is a multifunctional DALI control unit with up to 12 freely configurable keys. It is possible to choose between a selection of default user interfaces to control groups/scenes and colour/colour temperature. Each button can be individua
€323,48 Incl. tax
This interface converts DALI signals to an analogue 0-10V signal, thus enables the integration of operating devices with an electrically isolated 1-10V control input into a DALI system. DALI Device Type 5 (IEC62386-206) compatible: linear or logarithmic d
€43,13 Incl. tax
DALI bus standard IEC62386-parts 101, 102, 207.
DALI-2DT6
Output Voltage 9-42Vdc
Output Current Range300-1050mA
Output Power Range 2,7W~40W
€49,96 Incl. tax
DALI LED-driver (CV) with 2 channels to control Tunable White luminaires via one DALI address (DT8). As alternative to the DT8 control the device also supports the operating modes Balance&Dim, Dim2Warm and SwitchDim2 (control via 2 switch inputs without D
€95,25 Incl. tax
Module for the wireless connection of spatially separated DALI loads to a DALI system with BT5 Long Range. The transmitter sends DALI commands from the DALI system to one or more receivers. The receiver is available with or without an integrated DALI bus
€179,71 Incl. tax
This multifunctional DALI control module is wirelessly connected to the DALI ine. This battery powered switch can be mounted anywhere within the reception range of the receiver, without great installation effort. Each button can be individually
configure
€170,73 Incl. tax
DALI-2 input controller
Compatible with all DALI-2 certified Application Controller
Suitable only for DALI-2 certified or compatible lighting control systems, not compatible with Tridonic's comfortDIM system
€116,23 Incl. tax
DALI Repeater provides a galvanic isolation between two DALI lines without restricting the communication flow. The maximum number of DALI addresses in the bus system remains 64. Each of the galvanically isolated sides must be supplied with up to 250mA out
€327,08 Incl. tax
DALI-2 CS, sensor module (motion/brightness), application controller and instance mode.
various versions available in this series
€132,99 Incl. tax
DALI relay controller with 4 channels. Each channel has its own DALI address. Designed for controlling relays and contactors with 12V to 48V DC control input. Different versions suitable for DIN rail mounting or remote ceiling installation (housing with s
€95,25 Incl. tax
DALI RM8/RM16 provides a via DALI bus controllable relay switch, which allows direct switching of permanent loads up to 2kW. Various compact designs and variations with make contact or changeover contact are available. The purposeful switching in voltage
€89,00 Incl. tax
PWM-60-24DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 24Vdc at 2.5A; Dimming with DALI 2.
€39,35 Incl. tax
DALI LED-driver (CV) with 2 independent channels. Each channel has its own DALI address. As alternative to the DT6 control the device also supports the operating modes Balance&Dim, Dim2Warm (suitable for Tunable White luminaires) and SwitchDim2 (control v
€80,87 Incl. tax
A compact DALI motion detector with integrated light and temperature sensor. The module can be used as a control unit for a DALI system or as a measurement tool in combination with central control unit. The module is suitable for various applications such
€132,99 Incl. tax
DALI bus standard IEC62386-parts 101, 102, 207.
Output Voltage 10-54Vdc
Output Current Range 150-900mA
Output Power 25W
€68,11 Incl. tax