DALI-2 RM16
Switching actuator for non-DALI loads. Up to 3000VA / 16A, zero-cross switching. Max. breaking current 20A, inrush current 350A. Configurable via DALI Cockpit. Read more
Specifications
Brand:
Lunatone
Housing:
built in back box
DALI-2 certified:
Yes
Article number:
86456753
EAN:
9010342012365
Availability:
In stock (10)
Delivery time:
Will be shipped within 1 to 2 working days.
Information
DALI-2 RM16
Switching actuator / relay module with changeover contact 16A (flush mounting)
Art. No.: 86456753
Description
The Lunatone DALI-2 RM16 is a compact switching actuator with relay output for integrating non-DALI loads into a DALI installation. Zero-cross switching reduces switching stress and inrush currents, extending the lifetime of both relay and connected loads. Power-Up and System-Failure behavior can be easily configured via the DALI Cockpit PC software.
Applications
- Switching 230/277 V loads without DALI input in DALI circuits
- Control of lighting (resistive/capacitive), power supplies and auxiliary devices within specifications
- Flush mounting in installation boxes with limited space
Main features
- Zero-cross switching for reduced inrush currents and wear
- 1 relay changeover contact (16A), ON/OFF via DALI commands
- Programmable Power-Up and System-Failure behavior (ON / OFF / no Change) via DALI Cockpit
- Supply via DALI bus; typical DALI current consumption 3.8 mA
- Suitable for loads up to 3000 VA / 16 A
Technical data
| Power supply | Via DALI bus |
|---|---|
| Typ. DALI current consumption | 3.8 mA |
| Control | DALI (1 address), configurable via DALI Cockpit |
| Output (relay) | ON/OFF, up to 277 VAC |
| Relay contact type | 1× changeover contact |
| Max. nominal load | 3000 VA / 16 A |
| Max. continuous current | 2 × 8 A |
| Max. breaking current | 20 A |
| Max. inrush current | 350 A |
| Switching method | Zero-cross switching |
| Max. switching frequency | 1 Hz |
| Switching cycles at nominal (resistive) load | > 105 |
| Operating ambient temperature | −20 … +60 °C |
| Protection rating | IP20 |
| Conductor cross section | up to 1.5 mm² |
| Mounting | Flush mounting (back box) |
| Dimensions (L × W × H) | 59 × 33 × 15 mm |
| Color | Grey |
Important notes
- Maximum load: 3000 VA / 16 A; max. breaking current 20 A; max. inrush current 350 A.
- Always check inrush current of connected load; for high peaks an inrush limiter or stronger type may be required.
- Indoor use only (IP20); proper flush mounting in an installation box required.
- No dimming function; switching only via DALI commands.
- Always configure and test Power-Up and System-Failure behavior in DALI Cockpit to prevent unwanted switching.
© Copyright 2025 DALIwarehouse.com | All rights reserved | Alle rechten voorbehouden
