Tridonic

DALI-2 PIR sensor for light and occupancy detection. Developed to EN 62386-101 Ed.2. Requires an application controller. Powered via DALI, software adjustable, IP20, 5-year warranty.

Dimmable 48V constant voltage LED driver, 200W, one4all, lumDATA, for flexible LED strips, NFC, push terminals, emergency lighting, high efficiency.

Dimmable 48V LED driver, up to 100W, constant voltage. one4all interface and NFC, for LED strips. 1–100% dimming, 5-year guarantee, emergency lighting.

Dimmable constant current LED driver (200–600 mA), 1–100% dimming, max. 25 W, NFC programmable, DALI-2, for emergency lighting. Compact, energy efficient, easy installation.

Compact constant current LED driver (650-1050 mA), NFC, Casambi Ready, dimmable 1-100%, max. 38W, efficiency up to 87%, IP20, lifetime up to 100,000h, 5-year warranty.

Independent constant current LED driver, dimmable via DALI-2 and NFC. Adjustable current 100-500 mA, max. power 27 W. Efficiency up to 86%, IP20 housing, emergency lighting suitable. Nominal lifetime up to 100,000 hours.

Infrared remote control for lighting with on/off, dimming, and automatic functions. Range up to 20 m.

Dimmbarer 48V LED-Treiber, max. 35W, Konstantspannung. Mit one4all-Schnittstelle, für LED-Lichtbänder. 1–100% dimmbar, 5 Jahre Garantie, Notbeleuchtung.

Compact, dimmable LED driver (30 W) with adjustable constant current (350–700 mA), DALI-2, CLO, high efficiency. Suitable for emergency and decorative lighting.

Independent constant current LED driver, dimmable via DALI-2 and NFC. Adjustable current 450-1,050 mA, max. power 45 W. Efficiency up to 88%, IP20 housing, emergency lighting suitable. Nominal lifetime up to 100,000 hours.

Dimmable Constant Current 2-channel LED driver with DALI-2 DT8, adjustable current (350-1050 mA), and max. 38 W. Efficiency up to 87%. Lifetime up to 100,000 h.

Dimmable 48V LED driver, up to 60W, constant voltage. one4all interface and NFC, for LED strips. 1–100% dimming, 5-year guarantee, emergency lighting.

Dimmable LED driver, output current adjustable 425–1050 mA, max. 43.5 W. Supports DALI-2, DSI, switchDIM, corridorFUNCTION. For downlights, spots, decorative use. IP20.

Casambi Ready LED driver, adjustable current 300-700 mA via NFC. 28 W max., dimming 1-100%. Efficiency up to 85%, IP20, compatible with lumDATA and wireless networks.

Dimmable LED driver (DALI-2 DT8) with adjustable current 350-1050 mA. Max. 38W, 87% efficiency, IP20. Suitable for class I & II luminaires, emergency lighting, and Tunable White.

Holder for indicator LED in emergency mode. Glow-wire test passed at 850 °C. Suitable accessory for LED modules.

Green LED indicates charging current. Cable length 0.3 / 1.0 m. Plug connection for easy installation. Emergency lighting accessory.

DALI-2 PIR sensor for light and occupancy detection. Developed to EN 62386-101 Ed.2. Requires application controller. Powered via DALI, compact design, 5-10m mounting height, IP66, 5-year warranty.

Dimmable Casambi Ready LED driver with NFC configuration. 100-400mA, max. 14W, IP20. Suitable for class I & II luminaires, emergency lighting, and wireless networks up to 250 nodes.

Compact LED driver for Constant Current (650-1050 mA) with NFC and DALI. Dimming 1-100%, max. 38 W, efficiency up to 88%, standby < 0.4 W, lifetime up to 100,000 h. Suitable for class I & II luminaires, with thermal protection and programmable output curr

Bi-colour LED for emergency lighting with status display. Green: system OK, red: fault. Compact and easy to integrate into emergency lighting systems.

Optional strain relief set for LED drivers. Easy installation, screwless cable clamps for long strain relief (30x43x30 mm) or screws for short strain relief (15x34x30 mm). Class II compatible.