Lunatone

Der DALI 4Ch LED-Dimmer CV bietet 4 unabhängige Kanäle, jeder mit eigener DALI-Adresse. Unterstützt Spannungen von 12V bis 48V DC, mit maximalem Strom bis 16A. Geeignet für RGB und RGBW Lampen.

DALI-2 PS12 100mA is a reliable DALI bus power supply with 100mA current, suitable for up to 50 DALI devices. It supports voltages from 9V DC to 16V DC and is ideal for flush-mounted installation.

DALI-2 DIN-rail relay module with one normally open contact, zero-cross switching and integrated current limiter. Switches loads up to 4000 VA and handles inrush currents up to 1000 A. Configurable via DALI Cockpit.

DALI-2 switch actuator with zero-cross switching. For loads up to 1000VA / 6A (5A continuous). 1 NO contact, back box mounting, configurable via DALI Cockpit.

DALI-2 MC4L DIN Rail control module with four independent switching inputs for mains voltage. Supports dimming, switching, scenes, and RGBW color management via DALI-2. Suitable for DIN rail mounting.

Four-channel phase dimmer with DALI control for 230V dimmable lamps. Each output supports up to 10W load and 0.06A current per channel. Configurable via DALI Cockpit. DIN rail mounting.

DALI LED dimmer with 2 outputs for Tunable White lighting, controllable via DALI DT8. Operates on 12-48V DC, dimming range 0.1%-100%. Supports Balance&Dim, Dim2Warm, and SwitchDim2 modes.

Wireless wDALI module with 4 configurable inputs and battery power. Easy to install within receiver range. Programmable via DALI Cockpit, supports dimming, switching, and dynamic scenes.

DALI-2 MC4L control module with 4 configurable mains inputs. Supports dimming, switching, scenes, color temperature, and RGB control. Easy installation and configuration via DALI Cockpit and NFC.

Compact DALI-2 Expander to extend DALI line. Connects to DALI IN terminals. Increases device count and cable length. Built-in DALI bus power supply.

DALI-2 ROT NFC is a rotary switch for switching and dimming DALI lights. Supports Tunable White and RGB lighting. Fits standard flush-mounted boxes.

DALI-2 WLAN interface for configuring and controlling a DALI system via Wi-Fi using DALI Cockpit software. Available with or without 200mA DALI bus power supply.

DALI RGB LED Dimmer CV DT8 for RGB lighting. Operates on 12V-48V DC, supports DT8 and Colour&Dim, with 3 PWM outputs and 2 switch inputs

Compact DALI-2 sensor for motion and light intensity with instance mode. Suitable for integration in central control units, available in black and white, for indoor and outdoor use (IP65).

Compact DALI-2 light sensor with constant light control or threshold-based switching. For surface, flush or ceiling mounting. Powered via DALI bus.

DALI-2 Switch Cross pushbutton module with application controller: customizable buttons for DALI commands such as dimming, switching, and scenes. Easy configuration via DALI Cockpit or Lunatone software.

This interface converts DALI signals to an analog 0-10V signal, suitable for 1-10V control inputs. Compatible with DALI Device Type 5, supports linear and logarithmic dimming curves, 0-10V or 1-10V range.

DALI Jalousie module for controlling 230V blind motors via DALI. Supports 4 functions for opening/closing and adjusting the slat angle. Suitable for DIN rail and ceiling mount.

DIN rail relay module with 4 DALI outputs, ideal for switching non-dimmable loads up to 3.6kW. Programmable settings, zero cross-switching, and easy DALI software configuration.

DALI-2 control module with 4 mains inputs and 4 potentiometers for direct light control. Supports dimming, switching, scenes, DT8 color control, macros and sequences. DIN-rail mounted and powered via DALI bus.

DALI 1Ch LED Dimmer CV for constant voltage LED modules, 12V-48V DC. Current ratings up to 16A, dimmable via DALI or Sw&Dim/SwitchDim2. Available in different housings: flush mount, ceiling mount, and DIN rail.

CC component for LED lighting, provides reliable DALI-controlled current from 250mA to 1050mA. High efficiency, low standby loss, suitable for ceiling installation. Variants: 15W/250mA, 15W/350mA, 20W/500mA, 20W/700mA, 20W/1050mA.

DALI-2 CS, sensor module (motion/brightness), application controller and instance mode.
various versions available in this series

DALI-2 4-channel relay controller for DIN rail mounting. Each channel has its own DALI address. Suitable for relays with 12-48V DC control. Configurable via DALI Cockpit.