Module to wirelessly connect spatially separated DALI lines. The wireless connection is bidirectional – control is possible from both DALI lines. Additionally, DALI queries are supported.

Module for the wireless connection of spatially separated DALI loads to a DALI system with BT5 Long Range. The transmitter sends DALI commands from the DALI system to one or more receivers. The receiver is available with or without an integrated DALI bus

The DALI USB is used as interface between the DALI Cockpit PC Software and the devices on the DALI bus. It enables the addressing and configuration of DALI installations. The DALI USB is available in 6 different versions: with strain relief, for DIN Rail

wDALI Controls Wireless DALI Controls
overview
Wireless control of a DALI circuit
A wDALI control consists of at least two components: a receiving unit, which is connected to the DALI bus, and a control device (transmitter unit) that can be placed anyw

This multifunctional DALI control module is wirelessly connected to the DALI ine. This battery powered switch can be mounted anywhere within the reception range of the receiver, without great installation effort. Each button can be individually
configure

A remote control for DALI systems with 12 buttons. This remote control enables location independent control of a DALI system (light, blends, ventilators, … ). Each button can be individually configured with target address, button behaviour and DALI comman

Interface wirelessly connected to the DALI line. This battery powered wDALI module has four individually configurable switch inputs. The device can be mounted anywhere within the reception range of the receiver, which has to be connected to the DALI line.

Power Supply for DALI 4Net: PS 24V, 300mA

The KNX DALI-2 Gateway is DALI-2 and KNX certified. It is DALI multimaster capable and can transmit commands bidirectional from KNX to DALI and vice versa. The DALI system and the individual DALI devices can be configured with the DALI Cockpit PC Software

Interface from KNX to DALI, broadcast output to 4 DALI lines, 4 operating devices per DALI line, integrated DALI bus supply, supported applications: color temperature control (DT8: CW-WW), color control (DT8: RGB, RGBW), other (DT0, DT2 , DT3, DT4, DT6),

integration of up to 4 EnOcean buttons, configurable, sequencer, macros, DT8, DALI-2 application controller and instances, delivery status: application controller active, instances deactivated

86456203-HS DALI2 RM16 Din Rail: DALI2-zertifizierter Schalter für nahtlose Integration und effiziente Steuerung von Nicht-DALI-Lasten.

WLAN – DALI interface module, Commissioning, configuring and controlling of a DALI system via WLAN using the Lunatone software DALI Cockpit

The DALI-2 USB facilitates communication between DALI Cockpit PC software and devices on the DALI bus. It supports addressing and configuration of DALI installations and various protocols. Compact with 30mA bus power supply.

Pushbutton module with four programmable buttons. With the DALI Cockpit Software, as well as an NFC-ready smartphone and the Lunatone NFC app, each button can be individually configured with target address, button behaviour and DALI commands. Besides the

DALI-2 ROT Touch
L4: RGB and scenes

DALI-2 ROT Touch
L3: Tunable White und Szenen

DALI-2 ROT Touch
L2: groups, scenes and blinds

DALI-2 ROT Touch
L1: groups and scenes

DALI-2 ROT NFC
DALI ROT is a rotary knob basis to control the light level of DALI luminaires.

DALI-2 ROT Integration
DALI-2 ROT Integration is a rotary and push button for integration into higher-level building management systems (WAGO, Beckhoff, LUNATONE DALI-2 KNX gateway).

The DALI-2 RM8 provide a relay contact that can be controlled via the DALI bus to switch continuous loads up to 2kW.

The DALI-2 RM16 HS WE is a relay with DALI control for switching loads up to 2kW. Features zero-cross switching and DIN-rail mounting. Art. No.: 86456203-HS-WE.

DALI-2 (Art. No.:86456203-DE), certified successor of DALI (Art. No.:86458629-DE). Seamlessly integrates non-DALI loads up to 2kW via DALI bus, extends device lifespan with zero cross switching. Configuration via DALI Cockpit PC software.