Lunatone

The DALI-2 USB Interface 30mA facilitates communication between DALI Cockpit PC software and DALI devices. It supports addressing and configuration of DALI installations with bidirectional data connection.

Phase dimmer with DALI input for 230V lamps, 3-25W. Suitable for installation in class II devices. Supports leading and trailing edge dimming with automatic load detection.

DALI-2 PD 300W phase dimmer for 230V dimmable luminaires in DALI systems. Available in leading edge, trailing edge or universal with automatic load detection. From firmware 3.5, supports DALI-controlled switching.

The DALI RGBW LED Dimmer CV DT8 provides precise control of RGBW lighting through a single DALI address or two switch inputs. Operates with 12V-48V DC and supports various mounting methods.

DALI PS power supply for DALI bus. Output current 250mA, DIN rail mount. Supports 64 DALI devices. Input voltage 120-240Vac, IP40. Short-circuit proof, startup time 250ms, operating temp -20°C to +55°C.

The DALI-2 IoT Gateway connects DALI systems to IoT devices via LAN, offers RESTful API and WebSocket, supports Node-RED integration, and DIN rail mounting.

The DALI-2 RM8 provides a relay contact controlled via the DALI bus, switches loads up to 2kW, and extends lifespan through zero-crossing switching.

Compact DALI-2 module with 4 potential-free inputs. Suitable for dimming, switching, scenes, and color control. Configuration via DALI Cockpit and NFC.

The DALI-2 Display 4″ is a versatile control device with a 4″ capacitive touchscreen and 24-bit color depth. It features DALI and WLAN interfaces, as well as sensors for temperature, humidity, air quality, and more.

The DALI-2 IoT4 Gateway offers smart lighting control via LAN and supports up to 256 devices on 4 lines. Available with or without integrated power.

DALI USB: Interface for communication between DALI Cockpit software and DALI bus. Available in various versions, including mounting options and integrated bus power supply. Supports DALI, DALI-2, and extended DALI protocols.

DALI LED dimmer with 2 outputs for Tunable White lighting, controllable via DALI DT8. Operates on 12-48V DC, dimming range 0.1%-100%. Supports Balance&Dim, Dim2Warm, and SwitchDim2 modes.

The compact DALI-2 Expander DIN rail extends the DALI line, provides a sub-circuit with 200mA power supply, and increases the cable length by 300m. Suitable for DIN rail installation.

The 0-10V to DALI Converter converts a 0-10V analog signal into a DALI dimming value. Suitable for DIN-rail mounting, configurable via DALI Cockpit Software, 12-24V DC supply.

Capacitive 7″ touchscreen with 24-bit color depth for DALI systems. Offers dimming, switching, RGB color management, and more via WLAN and DALI. With integrated sensors for temperature, humidity, and air quality.

DIN rail relay module with 4 DALI outputs, ideal for switching non-dimmable loads up to 3.6kW. Programmable settings, zero cross-switching, and easy DALI software configuration.

Compact DALI-2 sensor for motion and light intensity with instance mode. Suitable for integration in central control units, available in black and white, for indoor and outdoor use (IP65).

Compact relay module for direct control of 230V AC loads via DALI. Switches permanent loads up to 2kW. DALI-2 certified, configurable via DALI Cockpit.

DALI 1Ch LED Dimmer CV for constant voltage LED modules, 12V-48V DC. Current ratings up to 16A, dimmable via DALI or Sw&Dim/SwitchDim2. Available in different housings: flush mount, ceiling mount, and DIN rail.

Compact module converting 0-10V control signals to DALI dim levels. Integrated DALI power supply for up to 10 devices. DIN rail mounting.

DALI-2 CS Mini with application controller. Motion and light sensor for constant light control. Suitable for indoor and outdoor, available in black and white.

DALI Jalousie module for controlling 230V blind motors via DALI. Supports 4 functions for opening/closing and adjusting the slat angle. Suitable for DIN rail and ceiling mount.

KNX 4 DALI Gateway ist DALI-2 und KNX zertifiziert. Unterstützt 4 DALI Linien mit 4 Geräten pro Linie. Integrierte DALI Busversorgung, erweiterbar mit DALI Expander. Konfiguration über ETS5.

Das KNX DALI-2 Gateway unterstützt bidirektionale Kommunikation zwischen KNX und DALI. Es konfiguriert DALI-Geräte mit der DALI Cockpit PC-Software und ist voll multimasterfähig.