Collection

Optional strain relief set for LED drivers. Easy installation, screwless cable clamps for long strain relief (30x43x30 mm) or screws for short strain relief (15x34x30 mm). Class II compatible.

Various types of DALI-2 ROT Touch L1: Groups and Scenes with 3 or 5 capacitive keys for groups, scenes, and blinds, integrated bus power supply available.

DALI RGB LED Dimmer CC DT8 provides dynamic RGB color control with one DALI address. Supports 12-48V DC, output 3-45V, up to 700mA per channel. Available with common plus and common minus connectors.

DALI-2 RM16 DE: DALI-controlled relay for 230V AC, 2000VA max load, zero cross switching, integrated current limiter. DALI 2 certified.

The DALI RM8 0-10V PWM interface converts DALI signals into a 0-10V control voltage for integrating 0-10V controlled devices into a DALI system. Includes relay for on/off switching.

Warm white LED strip 2850 K, 950 lm ±10 %, 24 V DC, 10 W/m, IP20. CRI >90, lifetime >50,000 h and 3M adhesive for easy mounting. 5 m reel with 102 chips/m.

DALI2 parts 101,102,207
DT8
Dimmable 24 V LED driver for constant voltage PWM-CV 100 W
Power 230VAC output 24V

Holder for indicator LED in emergency mode. Glow-wire test passed at 850 °C. Suitable accessory for LED modules.

Bi-colour LED for emergency lighting with status display. Green: system OK, red: fault. Compact and easy to integrate into emergency lighting systems.

Various DALI-2 ROT Touch L3 types with 3 or 5 sensor buttons. For switching, dimming, and color properties of light. User-friendly with programmable functions.

DALI-2 Display Bus Extension for extending DALI-2 7” Displays. Adds 3 extra DALI lines, each with 64 addresses. Equipped with Ethernet and 24V power supply.

The wDALI Remote is a wireless, configurable remote control with 12 buttons. This product does not include a receiver, only the transmitter.

Compact DALI motion sensor with integrated light sensor. The module can be used as a control unit for a DALI system or integrated in a building management system as simple sensor unit. The module is suitable for various applications such as offices, class

DALI CDC allows time-based adjustment of color temperature and brightness for Tunable White DALI DT8 luminaires. Suitable for backbox or DIN rail mounting

DALI-2 Sequencer for DIN rail mounting, 4 mains voltage inputs, 4 LEDs for active sequences, configurable via DALI-Cockpit PC software. Temperature range: -20°C to +75°C, IP20 protection.

DALI Bluetooth Low Energy Interface in combination with the DALI Touch App enables operation and control of DALI Systems with iOS and Android devices. The functionality of the DALI Bluetooth Interface is identical to the DALI Touchpanel Bluetooth and can

Dimmable constant current LED driver with DALI-2, switchDIM and corridorFUNCTION. Adjustable output current from 150–500 mA, up to 50 W output power, 93% efficiency, CLO function and lifetime up to 100,000 hours.

Dimmable, independent constant current LED driver (58 W) with adjustable current (750–1400 mA, NFC), DALI-2 and high efficiency. For emergency and decorative lighting.

DALI-2 MC1L PS DALI control module with isolated switch input for mains voltage. Supports dimming, switching, scenes, color temperature control, dynamic scenes, and more. Compact design for flush-mounted boxes.

Amplifies DALI signal (relay mode) and extends DALI setups (extended mode). Serves as DALI power supply, switchable via DIP switches.

Casambi Ready LED driver, adjustable current 300-700 mA via NFC. 28 W max., dimming 1-100%. Efficiency up to 85%, IP20, compatible with lumDATA and wireless networks.

The DALI RM16 DE WE relay controls 230V AC loads up to 2kW via DALI. Features inrush current limitation and configurable behavior on bus failure. Ideal for high inrush currents.

Compact module for controlling 2 DALI groups using conventional switches. Group selection via rotary switch. Does not support ballast addressing.

DALI CDC for DIN rail, for automatic color temperature and brightness control of Tunable White DALI DT8 luminaires. Real-time clock, easy installation, configurable via DALI Cockpit.