Collection

Cover and rotary knob

Compact constant current LED driver (650-1050 mA), NFC, Casambi Ready, dimmable 1-100%, max. 38W, efficiency up to 87%, IP20, lifetime up to 100,000h, 5-year warranty.

DALI-2 PIR sensor for light and occupancy detection. Developed to EN 62386-101 Ed.2. Requires application controller. Powered via DALI, compact design, 5-10m mounting height, IP66, 5-year warranty.

DALI RGB LED Dimmer CC DT8 provides dynamic RGB color control with one DALI address. Supports 12-48V DC, output 3-45V, up to 700mA per channel. Available with common plus and common minus connectors.

RGB LED strip 24 V, 18 W/m, 550 lm ±10 %, IP20. Lifetime >50,000 h, 102 chips/m, 5 m reel, 3M adhesive for easy mounting. Flexible and ideal for ambient lighting.

The DALI-2 4Ch E-RM module provides four DALI bus-controlled relay outputs for switching 230V loads up to 4 x 10W. Each channel has its own DALI address, configurable via DALI Cockpit. Ideal for DIN rail mounting.

DALI-2 MC1L control module with galvanically isolated switching input for mains voltage. Supports dimming, switching, scenes, and more via DALI Cockpit.

LED Touch Controller DALI 1 Zone, 1-channel switch for one DALI address. Supports switching and dimming, powered by the DALI bus. Works with scenes, groups, unicast, and broadcast.

DALI-2 relay actuator for DIN rail mounting. Suitable for inrush currents up to 490 A and nominal current up to 10 A. Potential-free relay, compatible with DALI/DALI-2.

DALI 4-channel relay controller, 12-48V DC, 4 DALI addresses, max input current 8A, max output current per channel 2A, IP20, configurable via DALI Cockpit. Suitable for ceiling mounting.

Interface for DALI to 0-10V PWM, switches ballast power on/off. DALI device type 5, linear/logarithmic dimming curve, IP20, max 160A inrush, galvanic isolation.

The DALI RM8 0-10V PWM interface converts DALI signals into a 0-10V control voltage for integrating 0-10V controlled devices into a DALI system. Includes relay for on/off switching.

The DALI DT8 to DT6 converter converts DALI DT8-Tc commands to DALI DT6 signals, enabling dimming and color temperature settings for two DALI DT6 LED drivers.

DALI 4Net B: Control of 256 DALI devices across 4 lines. Configuration via Ethernet and DALI-Cockpit software. Supports Modbus TCP, offers advanced features like circadian cycle and emergency lighting.

Polycarbonate end caps for LED profiles, available in various versions with or without cable hole. Easy click-on installation. Durable, 5-year warranty.

Polycarbonate cover opal or transparent, length 2 m. Fits aluminium profiles. Click-on installation. End caps and mounting clips sold separately.

Ceiling-mounted presence detector, DALI-2, 3ximpulse, 360°, Ø24m, adjustable lighting control, energy-saving function, easy installation, ideal for offices, schools, and public buildings.

Bi-colour LED for emergency lighting with status display. Green: system OK, red: fault. Compact and easy to integrate into emergency lighting systems.

The DALI RM16 DE WE relay controls 230V AC loads up to 2kW via DALI. Features inrush current limitation and configurable behavior on bus failure. Ideal for high inrush currents.

Compact module for controlling 2 DALI groups using conventional switches. Group selection via rotary switch. Does not support ballast addressing.

DALI CDC for DIN rail, for automatic color temperature and brightness control of Tunable White DALI DT8 luminaires. Real-time clock, easy installation, configurable via DALI Cockpit.

Module for bidirectional communication with DALI via RS232. Easy PLC connection, addressing, configuration, and monitoring. Suitable for ceiling mounting. Max. DALI supply: 240mA.

Module with serial interface to communicate with the DALI bus via RS232. Suitable for addressing, configuration, status queries, and monitoring. Din rail mounting.

SKYline IP44 ceiling recessed ring, fixed and conical, available in matte white or black. Aluminium with protective glass and seal. Suitable for MR16 spots in closed damp room ceilings.