Collection

DALI2 parts 101,102,207,209
Dimmable 12V LED driver for constant voltage PWM-CV 75W
Power 230VAC output 12V

DALI2 parts 101,102,207
DT8
Dimmable 24 V LED driver for constant voltage PWM-CV 100 W
Power 230VAC output 24V

DALI2 parts 101,102,207
Dimmable 12V LED driver for constant voltage PWM-CV 150 W
Power 230VAC output 12V

DALI2 parts 101,102,207,209
Dimmable 12V LED driver for constant voltage PWM-CV 150 W
Power 230VAC output 12V

DALI bus standard IEC62386-parts 101, 102, 207.
DALI-2DT6
Output Voltage 9-42Vdc
Output Current Range300-1050mA
Output Power Range 2,7W~40W

Adopt DALI standard protocol IEC62386-102,207,209.В В
Support DT8 type, CT(EDT2) and DIM(EDT1) control.В
Support switch, dimming and color adjustment function, zone control is available.В
DALI bus supply power.В
Easy to set address.В
Support sce

For supplying 240 mA for DALI devices or control modules without their own power supplies

DALI-2 CS Integration THP-AQ LE
for Integration in systems with central control units
sensor for motion, light, temperature, relative humidity, air pressure and air quality

PWM-120-24DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 24Vdc at 5A; Dimming with DALI 2.0

DALI ROT is a rotary knob basis to control the light level of DALI luminaires. Versions for Tunable White or RGB-capable luminaires are also available. The device was developed to fit the rotary covers and knobs of most manufacturers and to enable their i

DALI ROT is a rotary knob basis to control the light level of DALI luminaires. Versions for Tunable White or RGB-capable luminaires are also available. The device was developed to fit the rotary covers and knobs of most manufacturers and to enable their i

DALI LED-driver (CC) with 2 channels to control Tunable White luminaires via one DALI address (DT8). As alternative to the DT8 control the device also supports the operating modes Balance&Dim, Dim2Warm and SwitchDim2 (control via 2 switch inputs without D

This compact module converts analogue 0-10V control signals into DALI light levels. The module has an integrated bus supply for a small DALI system with up to 4 standard DALI ballasts (10mA). The device offers both a current sink and current source 0-10V

DALI SC / SC-A is a control unit to recall DALI scenes. The dial on the back of the device can be used to define which of the 16 scenes will be called at button push. A different light scene can be assigned to each of the 4 independent switch inputs. The

DALI Sequencer is a control unit to recall automatically timed instruction sequences. 4 different customised sequences can be programmed. Only one sequence can be active at a time, and is started and stopped by standard DALI commands. Housing variants fo

DALI Sequencer is a control unit to recall automatically timed instruction sequences. 4 different customised sequences can be programmed. Only one sequence can be active at a time, and is started and stopped by standard DALI commands. Housing variants fo

Cover and rotary knob

DALI2 parts 101,102,207
Dimmable 12 V LED driver for constant voltage PWM-CV 75 W
Power 230VAC output 12V

DALI2 parts 101,102,207,209
Dimmable 24V LED driver for constant voltage PWM-CV 75W
Power 230VAC output 24V

DALI-2 ROT Touch
L4: RGB and scenes

DALI-2 ROT Touch
L2: groups, scenes and blinds

24V DC, 60mA Power Supply

Power supply 24V, 60mA, back box

PWM-90-12DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 12Vdc at 7.5A; Dimming with DALI; IP67

LCM-40DA2
AC-DC Multi-Stage LED driver Constant Current (CC); Modular output 0.35A/0.5A/0.6A/0.7A/0.9A/1.05A; Dimming with DALI 2.0 & push; extra 12Vdc at 50mA

DALI ROT is a rotary knob basis to control the light level of DALI luminaires. Versions for Tunable White or RGB-capable luminaires are also available. The device was developed to fit the rotary covers and knobs of most manufacturers and to enable their i

DALI LED-driver (CC) with 2 independent channels. Each channel has its own DALI address. As alternative to the DT6 control the device also supports the operating modes Balance&Dim, Dim2Warm (suitable for Tunable White luminaires) and SwitchDim2 (control v

LED driver (CV) with one channel, can be operated as PWMBooster or Dimmer. The device operates as PWM-Booster, if PWM-signals are applied to the input (50Hz-1kHz). If operated with 100kΩ potentiometer or 0-10V control devices (active and passive), the dev

This interface converts DALI signals into a 1-10V control signal and allows the integration of operating devices with two 1-10V control inputs for brightness and color temperature into a DALI system. Output mode for channel1 / channel2 can be defined as e

This interface converts DALI signals to a galvanically isolated PWM signal, thus enables the integration of operating devices with PWM control input into a DALI system. DALI Device Type 5 (IEC62386-206) compatible: linear or logarithmic dimming curve, swi

DALI SC / SC-A is a control unit to recall DALI scenes. The dial on the back of the device can be used to define which of the 16 scenes will be called at button push. A different light scene can be assigned to each of the 4 independent switch inputs. The

cross plate