Collection

Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
24 V, 150W

Stylish DALI-taster: capacitive touch screen, glass display, multiple control modules, DALI-line power supply, double terminal blocks, adjustable light groups & color temp. control. RAL 9010 white.

DALI-2 ROT Integration
DALI-2 ROT Integration is a rotary and push button for integration into higher-level building management systems (WAGO, Beckhoff, LUNATONE DALI-2 KNX gateway).

DALI-2 CS Integration THP LE
for Integration in systems with central control units
sensor for motion, light, temperature, relative humidity & air pressure

24V DC, 130mA Power Supply

Power supply 24V, 130mA, back box

DALI LED-driver for Tunable White LED. Input voltage 230VAC, output with secure isolation between mains and DALI, independent control of light level and colour temperature (DT8). As alternative to the DT8 control the device also supports the operating mod

DALI Jalousie module can be used to control blind motors with 230V control input via DALI. Four configurable profiles can be programmed to open/close the blinds and to change the tilt angle. Different versions suitable for DIN rail mounting or remote ceil

DALI Jalousie module can be used to control blind motors with 230V control input via DALI. Four configurable profiles can be programmed to open/close the blinds and to change the tilt angle. Different versions suitable for DIN rail mounting or remote ceil

The DALI-2 RM16 HS WE is a relay with DALI control for switching loads up to 2kW. Features zero-cross switching and DIN-rail mounting. Art. No.: 86456203-HS-WE.

Module for the wireless connection of spatially separated DALI loads to a DALI system with BT5 Long Range. The transmitter sends DALI commands from the DALI system to one or more receivers. The receiver is available with or without an integrated DALI bus

This compact module converts analogue 0-10V control signals into DALI light levels. The module has an integrated bus supply for a small DALI system with up to 4 standard DALI ballasts (10mA). The device offers both a current sink and current source 0-10V

Interface with a, from the DALI bus galvanically isolated, input for mains voltage. The input can be configured with target address, button behaviour and DALI commands. Beside the standard functions, dimming, switching, scene recall, etc., predefined macr

Cover and rotary knob

Module with serial interface to communicate with the DALI bus via RS232, with RJ45 plug and screw terminals. Allows e.g. the connection of a PLC to a DALI system via RS232 for bidirectional data transmission. Suitable for addressing, configuration, status

DALI2 parts 101,102,207,209
Dimmable 24V LED driver for constant voltage PWM-CV 75W
Power 230VAC output 24V

PWM-120-12DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 12Vdc at 10A; Dimming with DALI 2.0

This interface converts DALI signals to a 1-10V control signal, thus enables the integration of operating devices with 1-10V control input into a DALI system. With the help of the switching relay the power supply of operating devices can be switched on an

DALI SC / SC-A is a control unit to recall DALI scenes. The dial on the back of the device can be used to define which of the 16 scenes will be called at button push. A different light scene can be assigned to each of the 4 independent switch inputs. The

DALI GC / GC-A is a control unit to address 2 DALI groups. With this compact module conventional light switches or pushbuttons can be used to send dimming and switching commands to 2 DALI groups. Using the dial on the back of the device the DALI/ luminari

Sensor Interface to connect conventional motion sensors or pushbuttons to a DALI system. Configuration options are for example: range, target address, DALI commands for on/off, hold time, … . Multiple sensors within one group synchronise automatically. Tw

DALI-2 Relay Unit - DR 3,6 Amp 240Vac

Input voltage 12 - 24Vdc
Output 12A
Signaal PWM-CV

DALI2 parts 101,102,207,209
Dimmable 12V LED driver for constant voltage PWM-CV 75W
Power 230VAC output 12V

DALI2 parts 101,102,207
Dimmable 24V LED driver for constant voltage PWM-CV 150 W
Power 230VAC output 24V