Collection

Compact control module for automatic power reduction / brightness reduction for night-time. The device has an integrated bus supply (20mA) for up to 7 standard DALI loads, extension possible to max. 64 loads is possible with a DALI Expander.

2 operatin

Push button coupler with 4 inputs for connection with standard potential free switches or pushbuttons (max wire length 0.50m). Alternatively 0-10V signals or potentiometers can be connected. Each input can be individually configured with target address, b

Power Supply for DALI 4Net: PS 24V, 300mA

Input voltage 12 - 24Vdc
Output 12A
Signaal PWM-CV

DALI bus standard IEC62386-parts 101, 102, 207.
Output Voltage 10-54Vdc
Output Current Range200-1200mA
Output Power Range 2W~36W

DALI2 parts 101,102,207
Dimmable 12 V LED driver for constant voltage PWM-CV 36 W
Power 230VAC output 12

Adopt DALI standard protocol IEC62386-102,207,209.
Support switch, dimming and color adjustment function; zone control is available.
DALI bus supply power.
Easy to set addresses.
Support scene, group, unicast and broadcast mode.
Touch vibration

Push Button Coupler, input 4 x 230V (10m), flexible configurable, sequencer, macros, DT8, DALI-2 Application Controller and Instances, DIN Rail, factory default setting: Application Controller activated (changeable DALI Cockpit), 4 Potentiometers to set t

integration of up to 4 EnOcean buttons, configurable, sequencer, macros, DT8, DALI-2 application controller and instances, delivery status: application controller active, instances deactivated

PWM-90-48DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 48VDC at 1.25A; Dimming with DALI 2.0

LCM-25DA2
ELGC-300-M-ADAAC-DC Single output LED driver Constant Power Mode with built-in PFC; Output 116Vdc at 2.8A; IP67; Dimming with DALI

DALI ROT is a rotary knob basis to control the light level of DALI luminaires. Versions for Tunable White or RGB-capable luminaires are also available. The device was developed to fit the rotary covers and knobs of most manufacturers and to enable their i

DALI interface module to convert DT8-Tc control commands to DT6 control signals. The module enables dimming and the setting of the colour temperature via DT8 commands, also for luminaires with two DALI DT6 LED-driver.

Sensor Interface to connect conventional motion sensors or pushbuttons to a DALI system. Configuration options are for example: range, target address, DALI commands for on/off, hold time, … . Multiple sensors within one group synchronise automatically. Tw

The DALI CDC enables a day time based adjustment of colour temperature and light level for Tunable White capable DALI DT8 luminaires (circadian daylight curve). The curve can be adjusted to fit the respective application.

Module with serial interface to communicate with the DALI bus via RS232. Allows e.g. the connection of a PLC to a DALI system via RS232 for bidirectional data transmission. Suitable for addressing, configuration, status queries and monitoring. Housing var

With the DALI Expander a new DALI sub-line can be created and supplied with power and information. The connected devices within the DALI sub-line can be controlled broadcast via the address of the DALI Expander. Alternatively the DALI sub-line can be cont

DALI bus standard IEC62386-101, 102, 209
DALI-2 DT6 and DT8
Output Voltage 9-42Vdc
Output Current Range 100-500mA
Output Power Range 0,9-12W

DALI2 parts 101,102,207
Dimmable 24 V LED driver for constant voltage PWM-CV 75 W
Power 230VAC output 24V

DALI bus standard IEC62386-parts 101, 102, 207.
Output Voltage 10-24Vdc
Output Current Range350-700mA
Output Power Range 3,5W~12W

DALI2 parts 101,102,207
DT8
Dimmable 24 V LED driver for constant voltage PWM-CV 100 W
Power 230VAC output 24V

DALI2 parts 101,102,207
Dimmable 24V LED driver for constant voltage PWM-CV 150 W
Power 230VAC output 24V

DALI-2 ROT Touch
L3: Tunable White und Szenen

DALI-2 ROT NFC
DALI ROT is a rotary knob basis to control the light level of DALI luminaires.

DALI-2 CS Integration THP-AQ
for Integration in systems with central control units
sensor for motion, light, temperature, relative humidity, air pressure and air quality

PWM-120-12DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 12Vdc at 10A; Dimming with DALI 2.0

Device with 2 DALI Tunable White LED dimmers. Suitable for constant voltage (CV) LED modules of 12V to 48V.

2 DALI addresses (Device Type 8, Color Type Tc), each DT8-Tc address allows independent control of brightness and color temperature.
Available

DALI LED-driver (CC) with 4 independent channels. Each channel has its own DALI address. As alternative to the DT6 control the device also supports the operating modes Colour&Dim (suitable for RGB and RGBW luminaires) and SwitchDim2 (control via 2 switch

DALI LED-driver for Tunable White LED. Input voltage 230VAC, output with secure isolation between mains and DALI, independent control of light level and colour temperature (DT8). As alternative to the DT8 control the device also supports the operating mod

This interface converts DALI signals into a 1-10V control signal and allows the integration of operating devices with two 1-10V control inputs for brightness and color temperature into a DALI system. Output mode for channel1 / channel2 can be defined as e

This interface converts DALI signals to a 1-10V control signal, thus enables the integration of operating devices with 1-10V control input into a DALI system. With the help of the switching relay the power supply of operating devices can be switched on an

This compact module converts analogue 0-10V control signals into DALI light levels. The module has an integrated bus supply for a small DALI system with up to 4 standard DALI ballasts (10mA). The device offers both a current sink and current source 0-10V

DALI GC / GC-A is a control unit to address 2 DALI groups. With this compact module conventional light switches or pushbuttons can be used to send dimming and switching commands to 2 DALI groups. Using the dial on the back of the device the DALI/ luminari

The DALI CDC enables a day time based adjustment of colour temperature and light level for Tunable White capable DALI DT8 luminaires (circadian daylight curve). The curve can be adjusted to fit the respective application.

Module with serial interface to communicate with the DALI bus via RS232. Allows e.g. the connection of a PLC to a DALI system via RS232 for bidirectional data transmission. Suitable for addressing, configuration, status queries and monitoring. Housing var

With the DALI Expander 3, three new DALI sub-lines can be created and supplied with power and information. The connected devices within each DALI sub-line can be controlled broadcast, each sub-line via its own DALI address. Alternatively the DALI sub-line