Lunatone

The DALI-2 4Ch E-RM module provides four DALI bus-controlled relay outputs for switching 230V loads up to 4 x 10W. Each channel has its own DALI address, configurable via DALI Cockpit. Ideal for DIN rail mounting.

Compact DALI-2 sensor module for motion and light intensity, delivered in Instance mode for integration into central control systems. Perfect for corridors, supporting constant light control.

Cover and rotary knob

The DALI-2 ROT Touch L4 is a rotary switch with 3 or 5 capacitive sensor buttons for RGB and scene control. Configurable via DALI Cockpit or NFC app.

DALI 3Ch LED Dimmer CC with 3 channels. Supports constant current (CC) LED modules. Available with common plus or minus connector, currents up to 700mA. For DALI and SwitchDim2 control.

DALI RM16 CEL ist ein DALI-gesteuertes Relais für 230V AC Lasten bis 2000VA. Zero-Cross-Schaltung und programmierbare Start-/Systemfehler-Einstellungen. DALI 2 zertifiziert.

The DALI RM8 0-10V PWM interface converts DALI signals into a 0-10V control voltage for integrating 0-10V controlled devices into a DALI system. Includes relay for on/off switching.

DALI CDC allows time-based adjustment of color temperature and brightness for Tunable White DALI DT8 luminaires. Suitable for backbox or DIN rail mounting

Module with serial interface to communicate with the DALI bus via RS232. Suitable for addressing, configuration, status queries, and monitoring. Din rail mounting.

Strain relief set for thickly jacketed cables. Easy installation, reliable grip, and cable-friendly. Fits recess box of 120x30x22mm. Set includes 2 covers, 2 clamps, and 4 screws.

Compact DALI SC scene module, controls 4 of 16 scenes via pushbuttons, programmable, powered by DALI line, installs in flush-mounted box, protection class IP20, operating temperature -25°C to +75°C.

cross plate

24V DC Voeding met een maximale uitgangsstroom van 60mA, geschikt voor installatie in een inbouwdoos. Bedrijfstemperatuur van -20°C tot +55°C, beschermingsklasse IP20.

DALI 4-channel relay controller, 12-48V DC, 4 DALI addresses, max input current 8A, max output current per channel 2A, IP20, configurable via DALI Cockpit. Suitable for ceiling mounting.

Compact DALI motion sensor with integrated light sensor. The module can be used as a control unit for a DALI system or integrated in a building management system as simple sensor unit. The module is suitable for various applications such as offices, class

LED driver (CV) with one channel, can be operated as PWMBooster or Dimmer. The device operates as PWM-Booster, if PWM-signals are applied to the input (50Hz-1kHz). If operated with 100kΩ potentiometer or 0-10V control devices (active and passive), the dev

Interface for DALI to 0-10V PWM, switches ballast power on/off. DALI device type 5, linear/logarithmic dimming curve, IP20, max 160A inrush, galvanic isolation.

This interface converts DALI signals into a galvanically isolated 0-10V analog signal. Compatible with DALI Device Type 5 (IEC62386-206). Linear or logarithmic dimming curve selectable.

DALI-2 Sequencer for DIN rail mounting, 4 mains voltage inputs, 4 LEDs for active sequences, configurable via DALI-Cockpit PC software. Temperature range: -20°C to +75°C, IP20 protection.

Cover and rotary knob for DALI systems. Suitable for in-wall boxes. Available in various colors.

Switching actuator for non-DALI loads. Up to 3000VA / 16A, zero-cross switching. Max. breaking current 20A, inrush current 350A. Configurable via DALI Cockpit.

Related product to the DALI LED Driver: A power supply with safe isolation from mains and DALI, suitable for 230VAC input and 650 mA constant current. Variants available with different constant currents.

DALI-2 ROT Touch L1 offers versatile control over brightness, color, and temperature with 3 or 5 sensor buttons. Available in various types for different applications.

Versatile DALI-2 CS Integration THP LE sensor module for motion, light, temperature, humidity, and air pressure, available in various types.