Collection

Dimmable LED driver, output current adjustable 425–1050 mA, max. 43.5 W. Supports DALI-2, DSI, switchDIM, corridorFUNCTION. For downlights, spots, decorative use. IP20.

Ceiling presence detector, DALI-2 broadcast, 1x slave, 1x impulse, WINSTA connector, 360°, Ø8m. Automatic lighting and energy saving.

Industrial LED driver with adjustable current from 100–700 mA, 75 W power, -40 to +80 °C temperature range, and NFC configuration. Ideal for demanding environments.

Cover and rotary knob

LED Driver DALI 1x12A, constant voltage, input 12-24V DC, output 12-24V DC, max 12A, 144W @ 12V, 288W @ 24V, dimmable 0-100%, DALI control, CE certified, IP20.

DALI2 parts 101,102,207
Dimmable 24 V LED driver for constant voltage PWM-CV 75 W
Power 230VAC output 24V

Optional strain relief set for LED drivers. Easy installation, screwless cable clamps for long strain relief (30x43x30 mm) or screws for short strain relief (15x34x30 mm). Class II compatible.

LED driver (CV) with one channel, can be operated as PWMBooster or Dimmer. The device operates as PWM-Booster, if PWM-signals are applied to the input (50Hz-1kHz). If operated with 100kΩ potentiometer or 0-10V control devices (active and passive), the dev

DALI-2 Sequencer for DIN rail mounting, 4 mains voltage inputs, 4 LEDs for active sequences, configurable via DALI-Cockpit PC software. Temperature range: -20°C to +75°C, IP20 protection.

Flexible 8 mm LED strip (48 V, 10 W/m, 1200 lm/m) with high CRI > 90 and uniform light output. Cuttable every 6.25 cm, 128 LEDs/m. Available in 3000 K and 4000 K, ideal for profiles and ambient lighting.

Dimmable 48V LED driver, up to 60W, constant voltage. one4all interface and NFC, for LED strips. 1–100% dimming, 5-year guarantee, emergency lighting.

DALI2 parts 101,102,207
Dimmable 24V LED driver for constant voltage PWM-CV 150 W
Power 230VAC output 24V

The DALI LS is a compact light sensor with integrated constant lighting control. DALI LS is able to automatically regulate the light level of individual luminaires or lighting groups. Using the dial on the back of the device the preferred light level can

Dimmable 48 V constant-voltage LED driver (200 W) with one4all interface (DALI-2, DSI, switchDIM, corridorFUNCTION) and NFC. Compatible with LLE FLEX. Lifetime up to 100,000 h.

ACL flex connector PCB-PCB for LLE FLEX modules. Easy open/close. For internal wiring, max. 5 A, 24–48 V. Compact accessory for LED modules.

DALI-2 sensor controller for up to 7 sensors (instances 203/204). Four modes, input for mains voltage sensors or switches (230 V), corridor function, configurable via DALI Cockpit.

Dimmable constant current LED driver (200–600 mA), 1–100% dimming, max. 25 W, NFC programmable, DALI-2, for emergency lighting. Compact, energy efficient, easy installation.

Dimmbarer Konstantstrom-LED-Treiber, 1–100 % Dimmbereich, max. 12,5 W, NFC-Programmierung, lange Lebensdauer, für DALI-2 und Notbeleuchtung geeignet. Energiesparend, einfache Installation.

Ceiling-mounted presence detector, DALI-2, 1x slave, 1x impulse, WINSTA connector, 360°, Ø24m. Adjustable lighting, energy saving, easy installation.

DALI-2 certified passive infrared presence detector with application controller, 3 channels, 360° detection up to Ø24 m, dimmable, adjustable sensitivity and brightness, IP54, expandable.

DALI-2 sensor with PIR 15m and light measurement. For instance mode with central DALI-2 control. Mounting: flush, surface or ceiling. Powered via DALI bus. Ideal for high spaces.

Compact LED driver with NFC and DALI-2, adjustable current (100-400 mA), dimmable (1-100%), max. 14W output, up to 83% efficiency, IP20 housing.

cross plate

Dimmable 48V constant voltage LED driver, 200W, one4all, lumDATA, for flexible LED strips, NFC, push terminals, emergency lighting, high efficiency.