LLE FLEX 8mm 24V 9W 1200lm 8xx SNC4 R05

Product Description

The LLE FLEX is a slim, flexible 8 mm LED strip designed for uniform, seamless light lines in coves, furniture, displays, and accents. Each variant operates on 24 V DC (constant voltage) and delivers 9 W at approx. 1200 lm (≈ 133 lm/W). Available as 827 / 830 / 840 / 865 (2700 K, 3000 K, 4000 K, 6500 K) within the SNC4 R05 series.

Main Features

• Slim 8 mm form factor for discreet integration.
• 24 V DC constant voltage for stable, long light lines.
• 9 W power with approx. 1200 lm luminous flux (≈ 133 lm/W).
• Homogeneous, seamless light line (with suitable profile/diffuser).
• Four colour temperatures: 2700 K / 3000 K / 4000 K / 6500 K (827/830/840/865).
• Part of the SNC4 R05 series.
• Long lifetime: 60,000 hours (L80/B10 at tp = 25 °C).
• CRI > 80 and available with CRI > 90.
• Low colour tolerance: MacAdam 3.
• Self-adhesive 3M tape on the back for easy installation.

Typical Applications

• Indirect cove and wall/ceiling lighting.
• Furniture and showcase lighting, shelving, and displays.
• Retail, hospitality, and reception areas.
• Functional light lines for schools, offices, or industrial environments.

Technical Data

Supply Voltage

24 V DC (constant voltage, SELV)

Power

9 W

Luminous Flux

approx. 1200 lm

Efficacy

≈ 133 lm/W

Colour Temperatures (CCT)

2700 K (827) · 3000 K (830) · 4000 K (840) · 6500 K (865)

Construction

Flexible LED module, width 8 mm

Series

SNC4 R05

Control

Constant voltage 24 V; dimmable with suitable CV driver (PWM, 0/1–10 V, DALI-CV)*

Light Pattern

Linear and uniform (depending on diffuser and installation)

Lifespan

60,000 hours (L80/B10 at tp = 25 °C)

Colour Rendering

CRI > 80 or CRI > 90

Colour Consistency

MacAdam 3

Variants (CCT)

• 827 — 2700 K: extra warm white, atmospheric light.
• 830 — 3000 K: warm white, modern residential/retail lighting.
• 840 — 4000 K: neutral white, fresh working light.
• 865 — 6500 K: cool white/daylight, bright and functional.

Important Notes

• Use only with 24 V DC constant voltage drivers with sufficient power reserve.
• Observe polarity; never connect directly to 230 V.
• For thermal stability and uniform light output: install preferably in an aluminium profile with diffuser.
• Consider voltage drop at longer lengths; power from both ends or use feed points if necessary.
• Dimming only with a suitable 24 V CV driver; check compatibility of dimming protocol and driver.
• Install and test according to applicable standards; installation by a qualified electrician is recommended.

* Dimming performance depends on the 24 V driver and dimming interface used.