Collection

DALI-2 ROT Integration
DALI-2 ROT Integration is a rotary and push button for integration into higher-level building management systems (WAGO, Beckhoff, LUNATONE DALI-2 KNX gateway).

DALI ROT is a rotary knob basis to control the light level of DALI luminaires. Versions for Tunable White or RGB-capable luminaires are also available. The device was developed to fit the rotary covers and knobs of most manufacturers and to enable their i

DALI RM8/RM16 provides a via DALI bus controllable relay switch, which allows direct switching of permanent loads up to 2kW. Various compact designs and variations with make contact or changeover contact are available. The purposeful switching in voltage

DALI relay controller with 4 channels. Each channel has its own DALI address. Designed for controlling relays and contactors with 12V to 48V DC control input. Different versions suitable for DIN rail mounting or remote ceiling installation (housing with s

DALI LED-driver for Tunable White LED. Input voltage 230VAC, output with secure isolation between mains and DALI, independent control of light level and colour temperature (DT8). As alternative to the DT8 control the device also supports the operating mod

Forms automatically a wireless communication network with up to 250 nodes
Adjustable output current between 100 – 400 mA via NFC
Max. output power 14 W
basicDIM Wireless

DALI PS serves as power supply for the DALI bus system. Standardised voltage and current limitation as well as timing ensure a reliable bus communication. With the output current of up to 250mA and entire DALI line can be supplied. Up to 64 addressable DA

DALI-2, Push DIM
Output Voltage 10-75Vdc
Output Current Range 500-17050mA
Output Power Range 75W

DALI ROT is a rotary knob basis to control the light level of DALI luminaires. Versions for Tunable White or RGB-capable luminaires are also available. The device was developed to fit the rotary covers and knobs of most manufacturers and to enable their i

DALI2 parts 101,102,207
Dimmable 12 V LED driver for constant voltage PWM-CV 75 W
Power 230VAC output 12V

DALI2 parts 101,102,207
Dimmable 24 V LED driver for constant voltage PWM-CV 75 W
Power 230VAC output 24V

Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
24 V, 100W

DALI ROT is a rotary knob basis to control the light level of DALI luminaires. Versions for Tunable White or RGB-capable luminaires are also available. The device was developed to fit the rotary covers and knobs of most manufacturers and to enable their i

DALI LED-driver (CV) with 2 channels to control Tunable White luminaires via one DALI address (DT8). As alternative to the DT8 control the device also supports the operating modes Balance&Dim, Dim2Warm and SwitchDim2 (control via 2 switch inputs without D

DALI relay controller with 4 channels. Each channel has its own DALI address. Designed for controlling relays and contactors with 12V to 48V DC control input. Different versions suitable for DIN rail mounting or remote ceiling installation (housing with s

Adopt DALI standard protocol IEC62386-102,207,209.В В
Support DT8 type, CT(EDT2) and DIM(EDT1) control.В
Support switch, dimming and color adjustment function, zone control is available.В
DALI bus supply power.В
Easy to set address.В
Support sce

Adopt DALI standard protocol IEC62386-102,207,209.В В
Support DT8 type, DIM(EDT1) and RGB(EDT3) color control.В
Support switch, dimming and color adjustment function, zone control is available.В
DALI bus supply power.В
Easy to set address.В
Supp

The DALI-2 RM8 provide a relay contact that can be controlled via the DALI bus to switch continuous loads up to 2kW.

Compact DALI-2 PD phase dimmers, 3-25W for leading/trailing edge. Suitable for 230V luminaires with DALI system control. Advanced features from firmware 3.5.

DALI-2 CS Mini Integration
Compact DALI-2 sensor module for Integration in systems with central control units
sensor for motion detection (PIR) & light intensity

DALI LED-driver (CC) with 2 independent channels. Each channel has its own DALI address. As alternative to the DT6 control the device also supports the operating modes Balance&Dim, Dim2Warm (suitable for Tunable White luminaires) and SwitchDim2 (control v

Pushbutton coupler with 4 inputs to connect standard potential-free switches or pushbuttons. New functions, DALI-2 and NFC configuration!

DALI2 parts 101,102,207,209
Dimmable 12V LED driver for constant voltage PWM-CV 75W
Power 230VAC output 12V

DALI2 parts 101,102,207,209
Dimmable 24V LED driver for constant voltage PWM-CV 75W
Power 230VAC output 24V