Collection

PWM-90-48DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 48VDC at 1.25A; Dimming with DALI 2.0

PWM-90-24DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 24Vdc at 3.75A; Dimming with DALI 2.0

DALI-2 Relay Unit - DR 3,6 Amp 240Vac

DALI bus standard IEC62386-parts 101, 102, 207.
DALI-2DT6
Output Voltage 9-42Vdc
Output Current Range300-1050mA
Output Power Range 2,7W~40W

This interface converts DALI signals to a galvanically isolated, analogue 0-10V signal, thus enables the integration of operating devices with 1-10V control input into a DALI system. DALI Device Type 5 (IEC62386-206) compatible: linear or logarithmic dimm

LED DALI Repeater - DALI-AMP-DIN

DALI bus standard IEC62386-parts 101, 102, 207.
DALI-2DT6
Output Voltage 9-42Vdc
Output Current Range300-1050mA
Output Power Range 2,7W~40W

PWM-120-12DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 12Vdc at 10A; Dimming with DALI 2.0

PWM-120-24DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 24Vdc at 5A; Dimming with DALI 2.0

Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
24 V, 18 W

Sensor Interface to connect conventional motion sensors or pushbuttons to a DALI system. Configuration options are for example: range, target address, DALI commands for on/off, hold time, … . Multiple sensors within one group synchronise automatically. Tw

DALI2 parts 101,102,207
Dimmable 12 V LED driver for constant voltage PWM-CV 36 W
Power 230VAC output 12

DALI2 parts 101,102,207
Dimmable 24 V LED driver for constant voltage PWM-CV 36 W
Power 230VAC output 24V

With this module the exchange of a lamp or dimmer is possible without re-addressing!

DALI Power Supply 80mA, back box

Sensor Interface to connect conventional motion sensors or pushbuttons to a DALI system. Configuration options are for example: range, target address, DALI commands for on/off, hold time, … . Multiple sensors within one group synchronise automatically. Tw

DALI PS serves as power supply for the DALI bus system. Voltage and current limitation according to standard as well as timing ensure a reliable bus communication. With the output current of up to 250mA an entire DALI line can be supplied. Up to 64 addres

DALI2 parts 101,102,207,209
DALI-2DT8
Output Voltage 9-54Vdc
Output Current Range 250-1000mA
Output Power Range 0,9W~20W

The LED Touch Controller DALI 1 Zone - EDA1 is a 1 channel switch. This means that it can serve 1 address. DALI 1 device

Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
24 V, 35 W

DALI SC / SC-A is a control unit to recall DALI scenes. The dial on the back of the device can be used to define which of the 16 scenes will be called at button push. A different light scene can be assigned to each of the 4 independent switch inputs. The

DALI GC / GC-A is a control unit to address 2 DALI groups. With this compact module conventional light switches or pushbuttons can be used to send dimming and switching commands to 2 DALI groups. Using the dial on the back of the device the DALI/ luminari

DALI bus standard IEC62386-parts 101, 102, 207.
Output Voltage 10-54Vdc
Output Current Range 150-900mA
Output Power 25W

DALI PS serves as power supply for the DALI bus system. Voltage and current limitation according to standard as well as timing ensure a reliable bus communication. With the output current of up to 250mA an entire DALI line can be supplied. Up to 64 addres