This interface converts DALI signals to a 1-10V control signal, thus enables the integration of operating devices with 1-10V control input into a DALI system. With the help of the switching relay the power supply of operating devices can be switched on an

DALI PS serves as power supply for the DALI bus system. Standardised voltage and current limitation as well as timing ensure a reliable bus communication. With the output current of up to 250mA and entire DALI line can be supplied. Up to 64 addressable DA

DALI-2 CS Corridor Integration
Compact DALI-2 sensor module for Integration in systems with central control units
sensor for motion detection (PIR) & light intensity

DALI LED-driver (CC) with 3 channels to control RGB luminaires via one DALI address (DT8). As alternative to the DT8 control the device also supports the operating modes Colour&Dim and SwitchDim2 (control via 2 switch inputs without DALI). Available with

Robust DALI switching actuator for ceiling installation. Controllable via DALI bus, suitable for loads up to 2kW. Operates at -20°C to +60°C, IP20, with Wieland connectors.

The DALI-2 RM16 HS WE is a relay with DALI control for switching loads up to 2kW. Features zero-cross switching and DIN-rail mounting. Art. No.: 86456203-HS-WE.

DALI RM8/RM16 provides a via DALI bus controllable relay switch, which allows direct switching of permanent loads up to 2kW. Various compact designs and variations with make contact or changeover contact are available. The purposeful switching in voltage

This interface converts DALI signals to a 1-10V control signal, thus enables the integration of operating devices with 1-10V control input into a DALI system. With the help of the switching relay the power supply of operating devices can be switched on an

Compact sensor module with motion detection (PIR) and light intensity measurement for DALI and DALI-2 systems. The module can either be used to directly control the DALI system (application controller) or simply to gather measurements for a building manag

A compact DALI motion detector with integrated light and temperature sensor. The module can be used as a control unit for a DALI system or as a measurement tool in combination with central control unit. The module is suitable for various applications such

DALI-2 CS, sensor module (motion/brightness), application controller and instance mode.
various versions available in this series

DALI-2 CS Corridor
Compact sensor module with integrated motion detection (PIR), light intensity measurement and light control unit.
Due to the horizontal detection angle (150 °), the sensor is particularly suitable for wall mounting, e.g. in corridors.

A compact DALI motion detector with integrated light and temperature sensor. The module can be used as a control unit for a DALI system or as a measurement tool in combination with central control unit. The module is suitable for various applications such

A compact DALI motion detector with integrated light and temperature sensor. The module can be used as a control unit for a DALI system or as a measurement tool in combination with central control unit. The module is suitable for various applications such

DALI LED-driver (CV) with 4 channels to control RGB or RGBW luminaires via one DALI address (DT8). As alternative to the DT8 control the device also supports the operating modes Colour&Dim and SwitchDim2 (control via 2 switch inputs without DALI). Availab

DALI LED-driver (CC) with 4 independent channels. Each channel has its own DALI address. As alternative to the DT6 control the device also supports the operating modes Colour&Dim (suitable for RGB and RGBW luminaires) and SwitchDim2 (control via 2 switch

DALI LED-driver (CC) with 4 channels to control RGB or RGBW luminaires via one DALI address (DT8). As alternative to the DT8 control the device also supports the operating modes Colour&Dim and SwitchDim2 (control via 2 switch inputs without DALI). Availab

DALI-2 CS Integration THP
for Integration in systems with central control units
sensor for motion, light, temperature, relative humidity and air pressure

DALI Daylight Interface with iOS and Android application is a convenient configuration tool for DALI devices.
Once the basic settings have been defined in DALI Cockpit, the device parameters such as daylight curve, timer, schedules, brightness, color tem

This interface converts DALI signals into a 1-10V control signal and allows the integration of operating devices with two 1-10V control inputs for brightness and color temperature into a DALI system. Output mode for channel1 / channel2 can be defined as e

This interface converts DALI signals into a 1-10V control signal and allows the integration of operating devices with two 1-10V control inputs for brightness and color temperature into a DALI system. Output mode for channel1 / channel2 can be defined as e

DALI Bluetooth Low Energy Interface in combination with the DALI Touch App enables operation and control of DALI Systems with iOS and Android devices. The functionality of the DALI Bluetooth Interface is identical to the DALI Touchpanel Bluetooth and can

Interface wirelessly connected to the DALI line. This battery powered wDALI module has four individually configurable switch inputs. The device can be mounted anywhere within the reception range of the receiver, which has to be connected to the DALI line.

This interface converts DALI signals to a 1-10V control signal, thus enables the integration of operating devices with 1-10V control input into a DALI system. With the help of the switching relay the power supply of operating devices can be switched on an