Push button coupler with 4 inputs for connection with standard potential free switches or pushbuttons (max wire length 0.50m). Alternatively 0-10V signals or potentiometers can be connected. Each input can be individually configured with target address, b
€71,88 Incl. tax
With only one DT6 DALI address, the Dim2Warm module allows the simultaneous control of brightness while changing the colour temperature. The lower the dimming value, the warmer the light.
€73,68 Incl. tax
DALI interface module to convert DT8-Tc control commands to DT6 control signals. The module enables dimming and the setting of the colour temperature via DT8 commands, also for luminaires with two DALI DT6 LED-driver.
€73,68 Incl. tax
This compact module converts analogue 0-10V control signals into DALI light levels. The module has an integrated bus supply for a small DALI system with up to 10 standard DALI ballasts (30mA). The device offers both a current sink and current source 0-10V
€73,68 Incl. tax
This compact module converts analogue 0-10V control signals into DALI light levels. The module has an integrated bus supply for a small DALI system with up to 4 standard DALI ballasts (10mA). The device offers both a current sink and current source 0-10V
€73,68 Incl. tax
This compact module converts analogue 0-10V control signals into DALI light levels. The module has an integrated bus supply for a small DALI system with up to 4 standard DALI ballasts (10mA). The device offers both a current sink and current source 0-10V
€73,68 Incl. tax
This compact module converts analogue 0-10V control signals into DALI light levels. The module has an integrated bus supply for a small DALI system with up to 4 standard DALI ballasts (10mA). The device offers both a current sink and current source 0-10V
€73,68 Incl. tax
This compact module converts analogue 0-10V control signals into DALI light levels. The module has an integrated bus supply for a small DALI system with up to 4 standard DALI ballasts (10mA). The device offers both a current sink and current source 0-10V
€73,68 Incl. tax
DALI LED-driver for Tunable White LED. Input voltage 230VAC, output with secure isolation between mains and DALI, independent control of light level and colour temperature (DT8). As alternative to the DT8 control the device also supports the operating mod
€79,98 Incl. tax
DALI LED-driver (CV) with 2 independent channels. Each channel has its own DALI address. As alternative to the DT6 control the device also supports the operating modes Balance&Dim, Dim2Warm (suitable for Tunable White luminaires) and SwitchDim2 (control v
€80,87 Incl. tax
DALI LED-driver for the constant current LED modules (CC) with 1 channel. Output signal can be controlled via DALI or SwitchDim2. Available with input voltage of 12V to 48V DC, different output currents ranging from 350mA to 2800mA, and PWM output.
€80,87 Incl. tax
DALI LED-driver. Input voltage 230VAC, output with secure isolation between mains and DALI. Output signal can be controlled via DALI or SwitchDim2.
Versions for constant current (250mA/350mA … 1050mA) and constant voltage (24V, 1A max.) are available.
€80,87 Incl. tax
DALI LED-driver (CV) with 3 independent channels. Each channel has its own DALI address. As alternative to the DT6 control the device also supports the operating modes Colour&Dim (suitable for RGB luminaires) and SwitchDim2 (control via 2 switch inputs wi
€86,26 Incl. tax
DALI-2 ROT Integration
DALI-2 ROT Integration is a rotary and push button for integration into higher-level building management systems (WAGO, Beckhoff, LUNATONE DALI-2 KNX gateway).
€88,06 Incl. tax
DALI ROT is a rotary knob basis to control the light level of DALI luminaires. Versions for Tunable White or RGB-capable luminaires are also available. The device was developed to fit the rotary covers and knobs of most manufacturers and to enable their i
€88,06 Incl. tax
DALI RM8/RM16 provides a via DALI bus controllable relay switch, which allows direct switching of permanent loads up to 2kW. Various compact designs and variations with make contact or changeover contact are available. The purposeful switching in voltage
€89,00 Incl. tax
DALI relay controller with 4 channels. Each channel has its own DALI address. Designed for controlling relays and contactors with 12V to 48V DC control input. Different versions suitable for DIN rail mounting or remote ceiling installation (housing with s
€89,86 Incl. tax
DALI LED-driver for Tunable White LED. Input voltage 230VAC, output with secure isolation between mains and DALI, independent control of light level and colour temperature (DT8). As alternative to the DT8 control the device also supports the operating mod
€90,76 Incl. tax
DALI PS serves as power supply for the DALI bus system. Standardised voltage and current limitation as well as timing ensure a reliable bus communication. With the output current of up to 250mA and entire DALI line can be supplied. Up to 64 addressable DA
€91,65 Incl. tax
DALI ROT is a rotary knob basis to control the light level of DALI luminaires. Versions for Tunable White or RGB-capable luminaires are also available. The device was developed to fit the rotary covers and knobs of most manufacturers and to enable their i
€93,45 Incl. tax
DALI ROT is a rotary knob basis to control the light level of DALI luminaires. Versions for Tunable White or RGB-capable luminaires are also available. The device was developed to fit the rotary covers and knobs of most manufacturers and to enable their i
€95,25 Incl. tax
DALI LED-driver (CV) with 2 channels to control Tunable White luminaires via one DALI address (DT8). As alternative to the DT8 control the device also supports the operating modes Balance&Dim, Dim2Warm and SwitchDim2 (control via 2 switch inputs without D
€95,25 Incl. tax
DALI relay controller with 4 channels. Each channel has its own DALI address. Designed for controlling relays and contactors with 12V to 48V DC control input. Different versions suitable for DIN rail mounting or remote ceiling installation (housing with s
€95,25 Incl. tax
The DALI-2 RM8 provide a relay contact that can be controlled via the DALI bus to switch continuous loads up to 2kW.
€96,80 Incl. tax