This interface converts DALI signals to a 1-10V control signal, thus enables the integration of operating devices with 1-10V control input into a DALI system. With the help of the switching relay the power supply of operating devices can be switched on an

The DALI-2 RM16 HS WE is a relay with DALI control for switching loads up to 2kW. Features zero-cross switching and DIN-rail mounting. Art. No.: 86456203-HS-WE.

Robust DALI switching actuator for ceiling installation. Controllable via DALI bus, suitable for loads up to 2kW. Operates at -20°C to +60°C, IP20, with Wieland connectors.

DALI-2 CS Corridor Integration
Compact DALI-2 sensor module for Integration in systems with central control units
sensor for motion detection (PIR) & light intensity

DALI LED-driver (CC) with 3 channels to control RGB luminaires via one DALI address (DT8). As alternative to the DT8 control the device also supports the operating modes Colour&Dim and SwitchDim2 (control via 2 switch inputs without DALI). Available with

Compacte sensormodule met geïntegreerde bewegingsdetectie (PIR), lichtintensiteitsmeting en lichtregeleenheid.
Naast de standaard detectie in het buitengebied heeft de DALI CS Mini een gevoeliger binnendetectiebereik voor het detecteren van kleine bewegi

This interface converts DALI signals to a 1-10V control signal, thus enables the integration of operating devices with 1-10V control input into a DALI system. With the help of the switching relay the power supply of operating devices can be switched on an

DALI PS serves as power supply for the DALI bus system. Standardised voltage and current limitation as well as timing ensure a reliable bus communication. With the output current of up to 250mA and entire DALI line can be supplied. Up to 64 addressable DA

This interface converts DALI signals to a 1-10V control signal, thus enables the integration of operating devices with 1-10V control input into a DALI system. With the help of the switching relay the power supply of operating devices can be switched on an

DALI LED-driver (CC) with 3 independent channels. Each channel has its own DALI address. As alternative to the DT6 control the device also supports the operating modes Colour&Dim (suitable for RGB luminaires) and SwitchDim2 (control via 2 switch inputs wi

Compact control module for automatic power reduction / brightness reduction for night-time. The device has an integrated bus supply (20mA) for up to 7 standard DALI loads, extension possible to max. 64 loads is possible with a DALI Expander.

2 operatin

The DALI RM16 provides a relay contact that can be controlled via the DALI bus

Interface with a, from the DALI bus galvanically isolated, input for mains voltage. The input can be configured with target address, button behaviour and DALI commands. Beside the standard functions, dimming, switching, scene recall, etc., predefined macr

Interface with 4, from the DALI bus galvanically isolated, inputs for mains voltage. The inputs can be individually configured with target address, button behaviour and DALI commands. Beside the standard functions, dimming, switching, scene recall, etc.,

DALI LED-driver (CC) with 2 channels to control Tunable White luminaires via one DALI address (DT8). As alternative to the DT8 control the device also supports the operating modes Balance&Dim, Dim2Warm and SwitchDim2 (control via 2 switch inputs without D

DALI-2 (Art. No.:86456203-DE), certified successor of DALI (Art. No.:86458629-DE). Seamlessly integrates non-DALI loads up to 2kW via DALI bus, extends device lifespan with zero cross switching. Configuration via DALI Cockpit PC software.

DALI-2 ROT NFC
DALI ROT is a rotary knob basis to control the light level of DALI luminaires.

This compact module converts 0-10V input voltages into DALI light levels. Configurations can be made using the DALI Cockpit software. Target address and dimming characteristic can be configured.

Interface with 4, from the DALI bus galvanically isolated, inputs for mains voltage. The inputs can be individually configured with target address, button behaviour and DALI commands. Beside the standard functions, dimming, switching, scene recall, etc.,

DALI PS serves as power supply for the DALI bus system. Standardised voltage and current limitation as well as timing ensure a reliable bus communication. With the output current of up to 250mA and entire DALI line can be supplied. Up to 64 addressable DA

Compact sensor module with motion detection (PIR) and light intensity measurement for DALI-2 systems. The module gathers measurements for the building management system (instance mode) – (DALI-2 CS Master, WAGO, Beckhoff, etc.).

DALI LED-driver (CV) with 3 channels to control RGB luminaires via one DALI address (DT8). As alternative to the DT8 control the device also supports the operating modes Colour&Dim and SwitchDim2 (control via 2 switch inputs without DALI). Available with

86456203-HS DALI2 RM16 Din Rail: DALI2-zertifizierter Schalter für nahtlose Integration und effiziente Steuerung von Nicht-DALI-Lasten.

DALI LED-driver (CV) with 4 independent channels. Each channel has its own DALI address. As alternative to the DT6 control the device also supports the operating modes Colour&Dim (suitable for RGB and RGBW luminaires) and SwitchDim2 (control via 2 switch