DALI-2 SI1L PRO
€95,58 Excl. tax
€102,00 Excl. tax
€115,65 Incl. tax €123,42 Incl. tax. Out of stock, but available Manual
€115,65 Incl. tax €123,42 Incl. tax. Out of stock, but available Manual
DALI-2 sensor controller for up to 7 sensors (instances 203/204). Four modes, input for mains voltage sensors or switches (230 V), corridor function, configurable via DALI Cockpit. Read more
Specifications
Brand:
Lunatone
Housing:
built in back box
DALI-2 certified:
Yes
Article number:
89453477-1L-P
Availability:
Out of stock, but available
Delivery time:
Dispatched within approximately 14 working days (please note: this is an estimate and depends on availability from the manufacturer; in some cases, it may be dispatched sooner, but it can also take longer).
Information
DALI-2 SI1L PRO
Sensor controller / multifunctional sensor module (flush-mounted, mains voltage 230 V)
Art. No.: 89453477-1L-P
Description
The Lunatone DALI-2 SI1L PRO is a compact sensor controller for integrating conventional sensors or switches with 230 V mains voltage into a DALI system. Up to 7 DALI-2 sensors (instances 203/204) can be connected and configured. The device supports four operating modes: motion control, motion with constant light control, constant light control, and light control with four thresholds. In addition, the SI1L PRO features an input for direct connection of mains voltage sensors or switches (230 V). Functions, time settings and system behaviour can easily be configured via the DALI Cockpit PC software.
Applications
- Integration of mains voltage sensors (230 V) and switches into DALI systems
- Connection of motion and presence detectors, push buttons and light sensors (instances 203/204)
- Constant light control and corridor function for energy-efficient lighting
- Flush mounting in installation boxes or devices with protection class II
Main Features
- Supports up to 7 DALI-2 sensors (instances 203/204)
- Four operating modes: motion, motion+constant light, constant light, light control
- Mains voltage input (230 V, LT1/N) for external sensors or switches
- Corridor function: second light level before switching off
- Fully configurable via DALI Cockpit
- Powered via the DALI bus, no additional power supply required
- Compact design for flush mounting (59 × 33 × 15 mm)
Technical Data
| Supply | Via DALI bus (9.5…22.5 V DC) |
|---|---|
| Typical DALI current consumption | 4.3 mA (16.5 V) / 4.8 mA (22.5 V) |
| Input | 1 switching input for mains voltage 230 V (LT1, N), frequency 50–60 Hz |
| Max. input cable length | 10 m (up to 50 m in interference-free environments) |
| Isolation | Reinforced isolation between DALI and mains input, test voltage 3000 V AC |
| Supported DALI-2 instances | 203 (motion sensor) / 204 (light sensor) |
| Operating modes | Motion, motion+constant light, constant light, light control (4 thresholds) |
| Behaviour / timing | Scenes, light levels and hold times configurable |
| Corridor function | Reduced light level before switch-off in case of absence |
| Operating temperature | −20…+60 °C |
| Storage / transport temperature | −20…+75 °C |
| Relative humidity | 15…90 %, non-condensing |
| Protection class | Class II (when properly installed) |
| Degree of protection housing / terminals | IP40 / IP20 |
| Connection | Spring terminals (push-in mechanism) |
| Conductor cross-section solid / stranded | 0.5…1.5 mm² / with ferrule 0.25…1 mm² |
| Stripping length | 8.5…9.5 mm (0.33…0.37") |
| Dimensions (L × W × H) | 59 × 33 × 15 mm |
| Colour | Grey |
| Standards | IEC 62386-101/103/303, EN 61547, EN 50015/IEC CISPR15, EN 61347-2-11/-1 |
| Markings | DALI-2, CE, UKCA |
Important Notes
- The DALI-2 SI1L PRO is specifically designed for sensors or switches operating directly at 230 V mains voltage.
- Indoor use only (IP20/IP40) and proper flush mounting required.
- Max. input cable length 10 m (50 m in interference-free environments, without parallel mains lines).
- The DALI line is not a SELV circuit; national low-voltage installation standards must be observed.
- Always test and correctly configure Power-Up and System-Failure behaviour in DALI Cockpit.
- Not suitable for safety-critical applications (emergency stop, fire alarm systems, etc.).
Comparison with related product
The DALI-2 SI1L PRO is closely related to the DALI-2 SI PRO. Key differences are shown below:
| Feature | DALI-2 SI PRO | DALI-2 SI1L PRO |
|---|---|---|
| Input type | Potential-free switching contact (T1, COM) | Switching input for mains voltage 230 V (LT1, N) |
| Isolation | Reinforced isolation DALI ↔ housing / input | Reinforced isolation DALI ↔ mains input (3000 V AC) |
| Max. input cable length | 5 m | 10 m (up to 50 m in interference-free environments) |
| DALI current consumption | approx. 5.1 mA (16.5 V) / 5.7 mA (22.5 V) | approx. 4.3 mA (16.5 V) / 4.8 mA (22.5 V) |
| Dimensions | approx. 40 × 28 × 15 mm | approx. 59 × 33 × 15 mm |
| Intended application | Integration of potential-free sensors/switches | Integration of mains voltage sensors or switches (230 V) |
Related products
DALI-2 SI PRO
DALI-2 sensor controller for up to 7 sensors (instances 203/204). Four modes: motion, motion+constant light, constant light, light control. Potential-free input, compact, via DALI Cockpit.
€89,01 Excl. tax
€107,70 Incl. tax
€107,70 Incl. tax
Orderable
© Copyright 2025 DALIwarehouse.com | All rights reserved | Alle rechten voorbehouden
