DALI-2 SI PRO
€89,01 Excl. tax
€95,00 Excl. tax
€107,70 Incl. tax €114,95 Incl. tax. Out of stock, but available Manual
€107,70 Incl. tax €114,95 Incl. tax. Out of stock, but available Manual
DALI-2 sensor controller for up to 7 sensors (instances 203/204). Four modes: motion, motion+constant light, constant light, light control. Potential-free input, compact, via DALI Cockpit. Read more
Specifications
Brand:
Lunatone
Housing:
built in back box
DALI-2 certified:
Yes
Article number:
89453477-P
Availability:
Out of stock, but available
Delivery time:
Dispatched within approximately 14 working days (please note: this is an estimate and depends on availability from the manufacturer; in some cases, it may be dispatched sooner, but it can also take longer).
Information
DALI-2 SI PRO
Sensor Controller / multifunctional sensor module
flush-mounted, potential-free
Art. No.: 89453477-P
Description
The Lunatone DALI-2 SI PRO is a compact sensor controller for the integration of conventional sensors or switches with a potential-free contact into a DALI system. Up to 7 DALI-2 sensors (instances 203/204) can be connected and configured. The device supports four operating modes: motion detection, motion detection with constant light control, constant light control, and light control with 4 thresholds. In addition, a potential-free switching input (T1, COM) is available for connecting a conventional motion sensor or push button. Configuration of functions, time settings, and system behavior is done easily via the DALI Cockpit PC software.
Applications
- Integration of conventional motion and presence detectors with potential-free contact into DALI systems
- Use with push buttons, contact switches, and light sensors (instances 203/204)
- Constant light control and corridor function for efficient lighting control
- Flush-mounted installation in installation boxes (protection class II)
Main features
- Supports up to 7 DALI-2 sensors (instances 203/204)
- 4 operating modes: motion, motion+constant light, constant light, light control
- Potential-free switching input for external sensor/switch (max. cable length 5 m)
- Corridor function: second light level before switching off in case of absence
- Configuration via DALI Cockpit; multiple modules possible in one DALI system
- Supplied via DALI bus, no additional power supply required
- Compact design for flush mounting (40 × 28 × 15 mm)
Technical data
| Power supply | Via DALI bus (9.5…22.5 V DC) |
|---|---|
| Typical DALI current consumption | 5.1 mA (16.5 V) / 5.7 mA (22.5 V) |
| Input | 1 potential-free switching contact (T1, COM), max. cable length 5 m |
| Insulation | Reinforced isolation DALI / housing, test voltage 3000 V AC |
| Supported DALI-2 instances | 203 (motion sensor) / 204 (light sensor) |
| Operating modes | Motion, motion+constant light, constant light, light control (4 thresholds) |
| Operating settings | Scenes, levels, and hold times configurable via DALI Cockpit |
| Corridor function | Reduced light level before switch-off |
| Ambient temperature (operation) | −20…+60 °C |
| Storage / transport temperature | −20…+75 °C |
| Rel. humidity | 15…90 %, non-condensing |
| Protection class | Class II (when used as intended) |
| Protection degree housing / terminals | IP40 / IP20 |
| Terminal type | Spring clamp (push mechanism) |
| Conductor cross section solid / stranded | 0.5…1.5 mm² / with ferrule 0.25…1 mm² |
| Stripping length | 8.5…9.5 mm (0.33…0.37") |
| Dimensions (L × W × H) | 40 × 28 × 15 mm |
| Color | Grey |
| Standards | IEC 62386-101/103/303, EN 61547, EN 50015/IEC CISPR15, EN 61347-2-11/-1 |
| Markings | DALI-2, CE, UKCA |
Important notes
- Indoor use only (IP20/IP40) and proper installation in flush-mount boxes.
- Use only in dry, clean environments; permanent installation required.
- Max. input cable length (T1/COM) 5 m; exceeding may cause interference.
- DALI line is not a SELV circuit; follow national low-voltage installation standards.
- Always configure and test Power-Up and System-Failure behavior in DALI Cockpit.
- Not suitable for safety-critical applications (emergency stop, fire alarm, etc.).
Comparison with related product
The DALI-2 SI PRO is closely related to the DALI-2 SI1L PRO. Key differences:
| Feature | DALI-2 SI PRO | DALI-2 SI1L PRO |
|---|---|---|
| Input type | Potential-free switching contact (T1, COM) | Switching input for mains voltage 230 V (LT1, N) |
| Insulation | Reinforced isolation DALI ↔ housing / input | Reinforced isolation DALI ↔ mains input (3000 V AC) |
| Max. input cable length | 5 m | 10 m (up to 50 m in interference-free environment) |
| DALI current consumption | approx. 5.1 mA (16.5 V) / 5.7 mA (22.5 V) | approx. 4.3 mA (16.5 V) / 4.8 mA (22.5 V) |
| Dimensions | approx. 40 × 28 × 15 mm | approx. 59 × 33 × 15 mm |
| Intended application | Integration of potential-free sensors/switches | Integration of mains voltage sensors or switches (230 V) |
Related products
DALI-2 SI1L PRO
DALI-2 sensor controller for up to 7 sensors (instances 203/204). Four modes, input for mains voltage sensors or switches (230 V), corridor function, configurable via DALI Cockpit.
€95,58 Excl. tax
€115,65 Incl. tax
€115,65 Incl. tax
Orderable
© Copyright 2025 DALIwarehouse.com | All rights reserved | Alle rechten voorbehouden
