Collection

Module to wirelessly connect spatially separated DALI lines. The wireless connection is bidirectional – control is possible from both DALI lines. Additionally, DALI queries are supported.

Module for the wireless connection of spatially separated DALI loads to a DALI system with BT5 Long Range. The transmitter sends DALI commands from the DALI system to one or more receivers. The receiver is available with or without an integrated DALI bus

The DALI USB is used as interface between the DALI Cockpit PC Software and the devices on the DALI bus. It enables the addressing and configuration of DALI installations. The DALI USB is available in 6 different versions: with strain relief, for DIN Rail

wDALI Controls Wireless DALI Controls
overview
Wireless control of a DALI circuit
A wDALI control consists of at least two components: a receiving unit, which is connected to the DALI bus, and a control device (transmitter unit) that can be placed anyw

This multifunctional DALI control module is wirelessly connected to the DALI ine. This battery powered switch can be mounted anywhere within the reception range of the receiver, without great installation effort. Each button can be individually
configure

A remote control for DALI systems with 12 buttons. This remote control enables location independent control of a DALI system (light, blends, ventilators, … ). Each button can be individually configured with target address, button behaviour and DALI comman

Interface wirelessly connected to the DALI line. This battery powered wDALI module has four individually configurable switch inputs. The device can be mounted anywhere within the reception range of the receiver, which has to be connected to the DALI line.

DALI-2 input controller
Compatible with all DALI-2 certified Application Controller
Suitable only for DALI-2 certified or compatible lighting control systems, not compatible with Tridonic's comfortDIM system

DALI-2 Relay Compatible with DALI and DALI-2 versions 1 channel actuator (switch) with DALI-2 input

DALI-2 power supply providing 70 mA for a DALI-2 installation

For supplying 240 mA for DALI devices or control modules without their own power supplies

Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
24 V, 18 W

Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
24 V, 150W

Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
24 V, 100W

lumDATA (DALI-2 part ext. 251, 252 and 253)
Can be either used build-in or independent with clip-on strain-relief (see accessory)
Dimming range 1 to 100 % (min. 5 mA)
Adjustable output current between 650 – 1050 mA via NFC or DALI

lumDATA (DALI-2 part ext. 251, 252 and 253)
Can be either used build-in or independent with clip-on strain-relief (see accessory)
Dimming range 1 to 100 % (min. 5 mA)
Adjustable output current between 300 – 700 mA via NFC or DALI

lumDATA (DALI-2 part ext. 251, 252 and 253)
Can be either used build-in or independent with clip-on strain-relief (see accessory)
Dimming range 1 to 100 % (min. 5 mA)
Adjustable output current between 100 – 400 mA via NFC or DALI

Forms automatically a wireless communication network with up to 250 nodes
Adjustable output current between 100 – 400 mA via NFC
Max. output power 14 W
basicDIM Wireless

Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
24 V, 35 W

Tridonic lichtregelsysteemcomponent, uitvoering DALI USB interface, uitvoering (P) DALI-USB interface, 1 kanalen, afmeting (lxbxh) mm 101.5x51x29.5, energiebesparend, DALI-USB interface

PWM-90-48DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 48VDC at 1.25A; Dimming with DALI 2.0

PWM-90-24DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 24Vdc at 3.75A; Dimming with DALI 2.0

PWM-90-12DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 12Vdc at 7.5A; Dimming with DALI; IP67

PWM-60-24DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 24Vdc at 2.5A; Dimming with DALI 2.

PWM-120-24DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 24Vdc at 5A; Dimming with DALI 2.0

PWM-120-12DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 12Vdc at 10A; Dimming with DALI 2.0

Power Supply for DALI 4Net: PS 24V, 300mA

Adopt DALI standard protocol IEC62386-102,207,209.
Support switch, dimming and color adjustment function; zone control is available.
DALI bus supply power.
Easy to set addresses.
Support scene, group, unicast and broadcast mode.
Touch vibration

Adopt DALI standard protocol IEC62386-102,207,209.В В
Support DT8 type, CT(EDT2) and DIM(EDT1) control.В
Support switch, dimming and color adjustment function, zone control is available.В
DALI bus supply power.В
Easy to set address.В
Support sce

Adopt DALI standard protocol IEC62386-102,207,209.
Support DT8 type, CT (EDT2) and RGB (EDT3) color control.В
Support switch, dimming and color adjustment function, zone control is available.
DALI bus supply power.
Easy to set address.
Support scene

Adopt DALI standard protocol IEC62386-102,207,209.В В
Support DT8 type, DIM(EDT1) and RGB(EDT3) color control.В
Support switch, dimming and color adjustment function, zone control is available.В
DALI bus supply power.В
Easy to set address.В
Supp

The LED Touch Controller DALI 1 Zone - EDA1 is a 1 channel switch. This means that it can serve 1 address. DALI 1 device

Input voltage 12 - 24Vdc
Output voltage 12 - 24Vdc
Output 4x5A
LED Outputs 4x and Ouput signaal 1x
Constant Voltage driver

Input voltage 12 - 24Vdc
Output 12A
Signaal PWM-CV

LED DALI Repeater - DALI-AMP-DIN

6 in 1 function: single address single switch, single address double switch, single group single switch, single group double switch, scene switch, broadcast switch.