The compact device is used to expand the DALI line.
The DALI-2 Expander is connected to the DALI line (DALI IN terminals) and behaves like a DALI ballast with a DALI address.

The DALI RM16 provides a relay contact that can be controlled via the DALI bus

With this module the exchange of a lamp or dimmer is possible without re-addressing!

Module to wirelessly connect spatially separated DALI lines. The wireless connection is bidirectional – control is possible from both DALI lines. Additionally, DALI queries are supported.

DALI gear for playback of internet radio stations or audio files via the DALI bus

86456203-HS DALI2 RM16 Din Rail: DALI2-zertifizierter Schalter für nahtlose Integration und effiziente Steuerung von Nicht-DALI-Lasten.

DALI-2 ROT Touch
L4: RGB and scenes

DALI-2 ROT Touch
L3: Tunable White und Szenen

DALI-2 ROT Touch
L2: groups, scenes and blinds

DALI-2 ROT Touch
L1: groups and scenes

DALI-2 ROT NFC
DALI ROT is a rotary knob basis to control the light level of DALI luminaires.

DALI-2 ROT Integration
DALI-2 ROT Integration is a rotary and push button for integration into higher-level building management systems (WAGO, Beckhoff, LUNATONE DALI-2 KNX gateway).

DALI-2 CS Integration THP-AQ LE
for Integration in systems with central control units
sensor for motion, light, temperature, relative humidity, air pressure and air quality

DALI-2 CS Integration THP LE
for Integration in systems with central control units
sensor for motion, light, temperature, relative humidity & air pressure

DALI-2 CS Corridor Integration
Compact DALI-2 sensor module for Integration in systems with central control units
sensor for motion detection (PIR) & light intensity

DALI-2 CS Mini Integration
Compact DALI-2 sensor module for Integration in systems with central control units
sensor for motion detection (PIR) & light intensity

DALI-2 CS Integration THP-AQ
for Integration in systems with central control units
sensor for motion, light, temperature, relative humidity, air pressure and air quality

DALI-2 CS Integration THP
for Integration in systems with central control units
sensor for motion, light, temperature, relative humidity and air pressure

Compact sensor module with motion detection (PIR) and light intensity measurement for DALI-2 systems. The module gathers measurements for the building management system (instance mode) – (DALI-2 CS Master, WAGO, Beckhoff, etc.).

DALI-2 CS, sensor module (motion/brightness), application controller and instance mode.
various versions available in this series

Push Button Coupler, input 4 x 230V (10m), flexible configurable, sequencer, macros, DT8, DALI-2 Application Controller and Instances, DIN Rail, factory default setting: Application Controller activated (changeable DALI Cockpit), 4 Potentiometers to set t

DALI Power Supply 80mA, back box

integration of up to 4 EnOcean buttons, configurable, sequencer, macros, DT8, DALI-2 application controller and instances, delivery status: application controller active, instances deactivated

24V DC, 130mA Power Supply

Power supply 24V, 130mA, back box

24V DC, 300mA Power Supply Din Rail

24V DC, 60mA Power Supply

Power supply 24V, 60mA, back box

Interface from KNX to DALI, broadcast output to 4 DALI lines, 4 operating devices per DALI line, integrated DALI bus supply, supported applications: color temperature control (DT8: CW-WW), color control (DT8: RGB, RGBW), other (DT0, DT2 , DT3, DT4, DT6),

WLAN – DALI interface module, Commissioning, configuring and controlling of a DALI system via WLAN using the Lunatone software DALI Cockpit

increase the number of DALI lines for the DALI-2 Display 7”, 3 additional DALI lines, use in combination with a DALI-2 Display 7”


DALI-2 Display Bus Extension
The module is used in combination with a DALI-2 Display 7” Plus or DALI-2 Display 7” Emerg

Multifunctional DALI-2 control and operating unit for DALI emergency light systems, addressing and set-up of the DALI emergency light system, monitoring and management, white

The DALI-2 Display 7″ Emergency is a multifunctional control and operating un

Compact sensor module with motion detection (PIR) and light intensity measurement for DALI and DALI-2 systems. The module can either be used to directly control the DALI system (application controller) or simply to gather measurements for a building manag

DALI-2 IoT Gateway is an interface to connect the DALI system with smart devices over the Internet of Things (IoT). With the DALI IoT Gateway, a simple realization of an intelligent system is possible, in which devices can be controlled and monitored with

DALI-2 CS Corridor
Compact sensor module with integrated motion detection (PIR), light intensity measurement and light control unit.
Due to the horizontal detection angle (150 °), the sensor is particularly suitable for wall mounting, e.g. in corridors.

Compacte sensormodule met geïntegreerde bewegingsdetectie (PIR), lichtintensiteitsmeting en lichtregeleenheid.
Naast de standaard detectie in het buitengebied heeft de DALI CS Mini een gevoeliger binnendetectiebereik voor het detecteren van kleine bewegi

The DALI Room Controller serves as an interface between Bluetooth 5.0 and DALI.

The Lunatone smartphone application DALI-Cockpit Mobile offers a clear and simple interface with an installation assistant, various configuration options and a configurable

The capacitive 4” colour display with 24-bit colour depth allows both the configuration, as well as the control and operation of a DALI system. Numerous widgets enable customisation. Supported functions are dimming and switching of groups, recall of scene