Collection

DALI-2 CS Integration THP
for Integration in systems with central control units
sensor for motion, light, temperature, relative humidity and air pressure

DALI Daylight Interface with iOS and Android application is a convenient configuration tool for DALI devices.
Once the basic settings have been defined in DALI Cockpit, the device parameters such as daylight curve, timer, schedules, brightness, color tem

This interface converts DALI signals into a 1-10V control signal and allows the integration of operating devices with two 1-10V control inputs for brightness and color temperature into a DALI system. Output mode for channel1 / channel2 can be defined as e

This interface converts DALI signals into a 1-10V control signal and allows the integration of operating devices with two 1-10V control inputs for brightness and color temperature into a DALI system. Output mode for channel1 / channel2 can be defined as e

DALI Bluetooth Low Energy Interface in combination with the DALI Touch App enables operation and control of DALI Systems with iOS and Android devices. The functionality of the DALI Bluetooth Interface is identical to the DALI Touchpanel Bluetooth and can

Interface wirelessly connected to the DALI line. This battery powered wDALI module has four individually configurable switch inputs. The device can be mounted anywhere within the reception range of the receiver, which has to be connected to the DALI line.

This interface converts DALI signals to a 1-10V control signal, thus enables the integration of operating devices with 1-10V control input into a DALI system. With the help of the switching relay the power supply of operating devices can be switched on an

Phase dimmer with DALI input to control dimmable 230V luminaires in a DALI system. Available for leading edge, trailing edge or as universal device with automatic load detection. Available as compact 25W version or as 300W version. From Firmware 3.5 onwar

DALI-2 CS Integration THP LE
for Integration in systems with central control units
sensor for motion, light, temperature, relative humidity & air pressure

Pushbutton module with four programmable buttons. With the DALI Cockpit Software, as well as an NFC-ready smartphone and the Lunatone NFC app, each button can be individually configured with target address, button behaviour and DALI commands. Besides the

Device with 2 DALI Tunable White LED dimmers. Suitable for constant voltage (CV) LED modules of 12V to 48V.

2 DALI addresses (Device Type 8, Color Type Tc), each DT8-Tc address allows independent control of brightness and color temperature.
Available

Compact DALI motion sensor with integrated light sensor. The module can be used as a control unit for a DALI system or integrated in a building management system as simple sensor unit. The module is suitable for various applications such as offices, class

Push Button Coupler, input 4 x 230V (10m), flexible configurable, sequencer, macros, DT8, DALI-2 Application Controller and Instances, DIN Rail, factory default setting: Application Controller activated (changeable DALI Cockpit), 4 Potentiometers to set t

For supplying 240 mA for DALI devices or control modules without their own power supplies

This multifunctional DALI control module is wirelessly connected to the DALI ine. This battery powered switch can be mounted anywhere within the reception range of the receiver, without great installation effort. Each button can be individually
configure

DALI-2 CS Integration THP-AQ
for Integration in systems with central control units
sensor for motion, light, temperature, relative humidity, air pressure and air quality

Module for the wireless connection of spatially separated DALI loads to a DALI system with BT5 Long Range. The transmitter sends DALI commands from the DALI system to one or more receivers. The receiver is available with or without an integrated DALI bus

Stylish DALI-taster: capacitive touch screen, glass display, multiple control modules, DALI-line power supply, double terminal blocks, adjustable light groups & color temp. control. RAL 9010 white.

Stylish DALI-taster: capacitive touch screen, glass display, multiple control modules, DALI-line power supply and adjustable light groups. RAL 9010 white.

DALI Jalousie module can be used to control blind motors with 230V control input via DALI. Four configurable profiles can be programmed to open/close the blinds and to change the tilt angle. Different versions suitable for DIN rail mounting or remote ceil

DALI Jalousie module can be used to control blind motors with 230V control input via DALI. Four configurable profiles can be programmed to open/close the blinds and to change the tilt angle. Different versions suitable for DIN rail mounting or remote ceil

wDALI Controls Wireless DALI Controls
overview
Wireless control of a DALI circuit
A wDALI control consists of at least two components: a receiving unit, which is connected to the DALI bus, and a control device (transmitter unit) that can be placed anyw

A remote control for DALI systems with 12 buttons. This remote control enables location independent control of a DALI system (light, blends, ventilators, … ). Each button can be individually configured with target address, button behaviour and DALI comman

DALI-2 CS Integration THP-AQ LE
for Integration in systems with central control units
sensor for motion, light, temperature, relative humidity, air pressure and air quality

The compact device is used to expand the DALI line.
The DALI-2 Expander is connected to the DALI line (DALI IN terminals) and behaves like a DALI ballast with a DALI address.

integration of up to 4 EnOcean buttons, configurable, sequencer, macros, DT8, DALI-2 application controller and instances, delivery status: application controller active, instances deactivated

The DALI RTC Timer module functions as a timer for DALI commands with quartz precision. Weekday based schedules can be specified. The device supports up to 28 entries, each consisting of a specific time, weekday and DALI command. Housing variants for DIN

The DALI RTC Timer module functions as a timer for DALI commands with quartz precision. Weekday based schedules can be specified. The device supports up to 28 entries, each consisting of a specific time, weekday and DALI command. Housing variants for DIN

With the DALI Expander a new DALI sub-line can be created and supplied with power and information. The connected devices within the DALI sub-line can be controlled broadcast via the address of the DALI Expander. Alternatively the DALI sub-line can be cont

With the DALI Expander a new DALI sub-line can be created and supplied with power and information. The connected devices within the DALI sub-line can be controlled broadcast via the address of the DALI Expander. Alternatively the DALI sub-line can be cont

DALI gear for playback of internet radio stations or audio files via the DALI bus

The compact device is used to expand the DALI line.
The DALI-2 Expander is connected to the DALI line (DALI IN terminals) and behaves like a DALI ballast with a DALI address.

Module with serial interface to communicate with the DALI bus via RS232, with RJ45 plug and screw terminals. Allows e.g. the connection of a PLC to a DALI system via RS232 for bidirectional data transmission. Suitable for addressing, configuration, status

DALI Repeater provides a galvanic isolation between two DALI lines without restricting the communication flow. The maximum number of DALI addresses in the bus system remains 64. Each of the galvanically isolated sides must be supplied with up to 250mA out

The DALI Room Controller serves as an interface between Bluetooth 5.0 and DALI.

The Lunatone smartphone application DALI-Cockpit Mobile offers a clear and simple interface with an installation assistant, various configuration options and a configurable

The DALI CDC enables a day time based adjustment of colour temperature and light level for Tunable White capable DALI DT8 luminaires (circadian daylight curve). The curve can be adjusted to fit the respective application.