Bus supply and system expansion

This compact 1HP DIN rail module enables the independent control of up to 4 DALI lines, which equals 256 DALI operating devices. Efficient scaling is possible with external DALI bus supplies. Via the DALI4Net connected control devices and control gear c

This compact 1HP DIN rail module enables the independent control of up to 4 DALI lines, which equals 256 DALI operating devices. Efficient scaling is possible with external DALI bus supplies. Via the DALI4Net connected control devices and control gear c

increase the number of DALI lines for the DALI-2 Display 7”, 3 additional DALI lines, use in combination with a DALI-2 Display 7”


DALI-2 Display Bus Extension
The module is used in combination with a DALI-2 Display 7” Plus or DALI-2 Display 7” Emerg

WLAN – DALI interface module, Commissioning, configuring and controlling of a DALI system via WLAN using the Lunatone software DALI Cockpit

DALI Repeater provides a galvanic isolation between two DALI lines without restricting the communication flow. The maximum number of DALI addresses in the bus system remains 64. Each of the galvanically isolated sides must be supplied with up to 250mA out

With the DALI Expander 3, three new DALI sub-lines can be created and supplied with power and information. The connected devices within each DALI sub-line can be controlled broadcast, each sub-line via its own DALI address. Alternatively the DALI sub-line

DALI Repeater provides a galvanic isolation between two DALI lines without restricting the communication flow. The maximum number of DALI addresses in the bus system remains 64. Each of the galvanically isolated sides must be supplied with up to 250mA out

The compact device is used to expand the DALI line.
The DALI-2 Expander is connected to the DALI line (DALI IN terminals) and behaves like a DALI ballast with a DALI address.

With the DALI Expander a new DALI sub-line can be created and supplied with power and information. The connected devices within the DALI sub-line can be controlled broadcast via the address of the DALI Expander. Alternatively the DALI sub-line can be cont

With the DALI Expander a new DALI sub-line can be created and supplied with power and information. The connected devices within the DALI sub-line can be controlled broadcast via the address of the DALI Expander. Alternatively the DALI sub-line can be cont

The compact device is used to expand the DALI line.
The DALI-2 Expander is connected to the DALI line (DALI IN terminals) and behaves like a DALI ballast with a DALI address.

For supplying 240 mA for DALI devices or control modules without their own power supplies