Collection
DALI2 parts 101,102,207
Dimmable 24 V LED driver for constant voltage PWM-CV 36 W
Power 230VAC output 24V
€54,35 Incl. tax
With this module the exchange of a lamp or dimmer is possible without re-addressing!
€62,62 Incl. tax
DALI Power Supply 80mA, back box
€62,90 Incl. tax
Sensor Interface to connect conventional motion sensors or pushbuttons to a DALI system. Configuration options are for example: range, target address, DALI commands for on/off, hold time, … . Multiple sensors within one group synchronise automatically. Tw
€62,90 Incl. tax
DALI PS serves as power supply for the DALI bus system. Voltage and current limitation according to standard as well as timing ensure a reliable bus communication. With the output current of up to 250mA an entire DALI line can be supplied. Up to 64 addres
€62,90 Incl. tax
DALI2 parts 101,102,207,209
DALI-2DT8
Output Voltage 9-54Vdc
Output Current Range 250-1000mA
Output Power Range 0,9W~20W
€63,68 Incl. tax
The LED Touch Controller DALI 1 Zone - EDA1 is a 1 channel switch. This means that it can serve 1 address. DALI 1 device
€65,18 Incl. tax
Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
24 V, 35 W
€65,93 Incl. tax
DALI SC / SC-A is a control unit to recall DALI scenes. The dial on the back of the device can be used to define which of the 16 scenes will be called at button push. A different light scene can be assigned to each of the 4 independent switch inputs. The
€66,49 Incl. tax
DALI GC / GC-A is a control unit to address 2 DALI groups. With this compact module conventional light switches or pushbuttons can be used to send dimming and switching commands to 2 DALI groups. Using the dial on the back of the device the DALI/ luminari
€66,49 Incl. tax
DALI bus standard IEC62386-parts 101, 102, 207.
Output Voltage 10-54Vdc
Output Current Range 150-900mA
Output Power 25W
€68,11 Incl. tax
DALI PS serves as power supply for the DALI bus system. Voltage and current limitation according to standard as well as timing ensure a reliable bus communication. With the output current of up to 250mA an entire DALI line can be supplied. Up to 64 addres
€68,29 Incl. tax
This interface converts DALI signals to a galvanically isolated PWM signal, thus enables the integration of operating devices with PWM control input into a DALI system. DALI Device Type 5 (IEC62386-206) compatible: linear or logarithmic dimming curve, swi
€70,09 Incl. tax
DALI LED-driver for constant voltage LED modules (CV) with 1 channel. Output signal can be controlled via DALI or Sw&Dim/ SwitchDim2. Available in three different housing versions, with input voltage of 12V to 28V DC or 12V to 48V DC, version dependent in
€71,88 Incl. tax
With the DALI Temp PT1000 temperature can be measured. The measured temperature can be read using DALI scene values. Alongside the integrated temperature sensor, an external PT1000 sensing element can be added. The device can be used to control blinds or
€71,88 Incl. tax
The DALI LS is a compact light sensor with integrated constant lighting control. DALI LS is able to automatically regulate the light level of individual luminaires or lighting groups. Using the dial on the back of the device the preferred light level can
€71,88 Incl. tax
LED driver (CV) with one channel, can be operated as PWMBooster or Dimmer. The device operates as PWM-Booster, if PWM-signals are applied to the input (50Hz-1kHz). If operated with 100kΩ potentiometer or 0-10V control devices (active and passive), the dev
€71,88 Incl. tax
DALI SC / SC-A is a control unit to recall DALI scenes. The dial on the back of the device can be used to define which of the 16 scenes will be called at button push. A different light scene can be assigned to each of the 4 independent switch inputs. The
€71,88 Incl. tax
DALI GC / GC-A is a control unit to address 2 DALI groups. With this compact module conventional light switches or pushbuttons can be used to send dimming and switching commands to 2 DALI groups. Using the dial on the back of the device the DALI/ luminari
€71,88 Incl. tax
Push button coupler with 4 inputs for connection with standard potential free switches or pushbuttons (max wire length 0.50m). Alternatively 0-10V signals or potentiometers can be connected. Each input can be individually configured with target address, b
€71,88 Incl. tax
With only one DT6 DALI address, the Dim2Warm module allows the simultaneous control of brightness while changing the colour temperature. The lower the dimming value, the warmer the light.
€73,68 Incl. tax
DALI interface module to convert DT8-Tc control commands to DT6 control signals. The module enables dimming and the setting of the colour temperature via DT8 commands, also for luminaires with two DALI DT6 LED-driver.
€73,68 Incl. tax
This compact module converts analogue 0-10V control signals into DALI light levels. The module has an integrated bus supply for a small DALI system with up to 10 standard DALI ballasts (30mA). The device offers both a current sink and current source 0-10V
€73,68 Incl. tax
This compact module converts analogue 0-10V control signals into DALI light levels. The module has an integrated bus supply for a small DALI system with up to 4 standard DALI ballasts (10mA). The device offers both a current sink and current source 0-10V
€73,68 Incl. tax
This compact module converts analogue 0-10V control signals into DALI light levels. The module has an integrated bus supply for a small DALI system with up to 4 standard DALI ballasts (10mA). The device offers both a current sink and current source 0-10V
€73,68 Incl. tax
This compact module converts analogue 0-10V control signals into DALI light levels. The module has an integrated bus supply for a small DALI system with up to 4 standard DALI ballasts (10mA). The device offers both a current sink and current source 0-10V
€73,68 Incl. tax
This compact module converts analogue 0-10V control signals into DALI light levels. The module has an integrated bus supply for a small DALI system with up to 4 standard DALI ballasts (10mA). The device offers both a current sink and current source 0-10V
€73,68 Incl. tax
DALI bus standard IEC62386-parts 101, 102, 207.
Output Voltage 10-54Vdc
Output Current Range200-1200mA
Output Power Range 2W~36W
€78,98 Incl. tax
DALI LED-driver for Tunable White LED. Input voltage 230VAC, output with secure isolation between mains and DALI, independent control of light level and colour temperature (DT8). As alternative to the DT8 control the device also supports the operating mod
€79,98 Incl. tax
DALI LED-driver (CV) with 2 independent channels. Each channel has its own DALI address. As alternative to the DT6 control the device also supports the operating modes Balance&Dim, Dim2Warm (suitable for Tunable White luminaires) and SwitchDim2 (control v
€80,87 Incl. tax
DALI LED-driver for the constant current LED modules (CC) with 1 channel. Output signal can be controlled via DALI or SwitchDim2. Available with input voltage of 12V to 48V DC, different output currents ranging from 350mA to 2800mA, and PWM output.
€80,87 Incl. tax
DALI LED-driver. Input voltage 230VAC, output with secure isolation between mains and DALI. Output signal can be controlled via DALI or SwitchDim2.
Versions for constant current (250mA/350mA … 1050mA) and constant voltage (24V, 1A max.) are available.
€80,87 Incl. tax
Input voltage 12 - 24Vdc
Output voltage 12 - 24Vdc
Output 4x5A
LED Outputs 4x and Ouput signaal 1x
Constant Voltage driver
€81,20 Incl. tax
Adopt DALI standard protocol IEC62386-102,207,209.
Support DT8 type, CT (EDT2) and RGB (EDT3) color control.В
Support switch, dimming and color adjustment function, zone control is available.
DALI bus supply power.
Easy to set address.
Support scene
€86,15 Incl. tax
DALI LED-driver (CV) with 3 independent channels. Each channel has its own DALI address. As alternative to the DT6 control the device also supports the operating modes Colour&Dim (suitable for RGB luminaires) and SwitchDim2 (control via 2 switch inputs wi
€86,26 Incl. tax
Input voltage 12 - 24Vdc
Output 12A
Signaal PWM-CV
€87,18 Incl. tax