WLAN – DALI interface module, Commissioning, configuring and controlling of a DALI system via WLAN using the Lunatone software DALI Cockpit

DALI Repeater provides a galvanic isolation between two DALI lines without restricting the communication flow. The maximum number of DALI addresses in the bus system remains 64. Each of the galvanically isolated sides must be supplied with up to 250mA out

The DALI Touchpanel is a multifunctional DALI control unit with up to 12 freely configurable keys. It is possible to choose between a selection of default user interfaces to control groups/scenes and colour/colour temperature. Each button can be individua

The DALI USB is used as interface between the DALI Cockpit PC Software and the devices on the DALI bus. It enables the addressing and configuration of DALI installations. The DALI USB is available in 6 different versions: with strain relief, for DIN Rail

The DALI USB is used as interface between the DALI Cockpit PC Software and the devices on the DALI bus. It enables the addressing and configuration of DALI installations. The DALI USB is available in 6 different versions: with strain relief, for DIN Rail

Module with serial interface to communicate with the DALI bus via RS232. Allows e.g. the connection of a PLC to a DALI system via RS232 for bidirectional data transmission. Suitable for addressing, configuration, status queries and monitoring. Housing var

Module with serial interface to communicate with the DALI bus via RS232. Allows e.g. the connection of a PLC to a DALI system via RS232 for bidirectional data transmission. Suitable for addressing, configuration, status queries and monitoring. Housing var

The DALI USB is used as interface between the DALI Cockpit PC Software and the devices on the DALI bus. It enables the addressing and configuration of DALI installations. The DALI USB is available in 6 different versions: with strain relief, for DIN Rail

With the DALI Expander 3, three new DALI sub-lines can be created and supplied with power and information. The connected devices within each DALI sub-line can be controlled broadcast, each sub-line via its own DALI address. Alternatively the DALI sub-line

DALI Sequencer is a control unit to recall automatically timed instruction sequences. 4 different customised sequences can be programmed. Only one sequence can be active at a time, and is started and stopped by standard DALI commands. Housing variants fo

DALI-2 ROT Touch
L4: RGB and scenes

DALI-2 ROT Touch
L3: Tunable White und Szenen